Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

niteridaz503 · 09-09-2009, 11:22 AM

Hey guys quick question, this is my 1st time cracking a diff open and im not to mechanically inclined

so as im putting the diff back together i cant put the shafts that go into the VLSD back into place i can get one side in but not the other. Does this maybe mean when i put the 2 phillips screws back into place i unaligned the ring gear some how? any info would help alot thankz....

EDIT UPDATE:
Its freakin awsome just did a few figure 8's and its good to go. I had some issues with the splines because the viscous coupler splines ended up shifting to where the shafts that go into the VLSD wouldnt line up but re-did everything and its really worth it and a great mod by far and recomend it to anyone who cannot afford a fancy 1.5 or 2 way like me....

09-09-2009, 11:22 AM	#66
niteridaz503 Zilvia Addict Join Date: Sep 2009 Location: Nor Cal Age: 37 Posts: 720 Trader Rating: (10)	Hey guys quick question, this is my 1st time cracking a diff open and im not to mechanically inclined so as im putting the diff back together i cant put the shafts that go into the VLSD back into place i can get one side in but not the other. Does this maybe mean when i put the 2 phillips screws back into place i unaligned the ring gear some how? any info would help alot thankz.... EDIT UPDATE: Its freakin awsome just did a few figure 8's and its good to go. I had some issues with the splines because the viscous coupler splines ended up shifting to where the shafts that go into the VLSD wouldnt line up but re-did everything and its really worth it and a great mod by far and recomend it to anyone who cannot afford a fancy 1.5 or 2 way like me.... Last edited by niteridaz503; 09-09-2009 at 09:44 PM..