Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

roco · 02-15-2009, 03:08 PM

next is the cage, thanks to wayne from swrc.
for bending the tube with his new benders, top guy.
Main hoop, front legs

rear x brace

DASH BAR

Triangulating the front end out to the turrets.

started on the door bars, and triangulated rear end

x cross braced the door bars.

started on the passenger door bar.

rear triangulation bars.

rear harness bar

started to mount the steering rack and pedal box
off the dash bar, I decided to put the box over the
rack, and not on the floor. Less room but will
look a lot tidier.

02-15-2009, 03:08 PM	#56
roco Leaky Injector Join Date: Feb 2009 Location: IRELAND Age: 38 Posts: 145 Trader Rating: (0)	next is the cage, thanks to wayne from swrc. for bending the tube with his new benders, top guy. Main hoop, front legs rear x brace DASH BAR Triangulating the front end out to the turrets. started on the door bars, and triangulated rear end x cross braced the door bars. started on the passenger door bar. rear triangulation bars. rear harness bar started to mount the steering rack and pedal box off the dash bar, I decided to put the box over the rack, and not on the floor. Less room but will look a lot tidier.