Quote:
Originally Posted by AceInHole
That's exactly what I did. My upper mounts are off my old D2 setup (like 4 years old and still not seized!!!). The fronts used a 16 to 14mm spacer, and in back I have the standard Koni, so it was a 12 - 10mm spacer IIRC. I'll have to drill out the bushings and use a 9/16" or 14mm ID pipe insert on the upper mount when I convert to 8611's in back.
|
What did you mean the front uses 16 to 14mm spacer? Possible to show which part you are referring to?
Thanks.