Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

aNskY · 08-13-2007, 03:17 PM

according to the sr20 fsm, the pins on the input side of the ignitor are supposed to have continuity with the ground (5th pin). now all the q45 ignitors i have found (there was 5-6 at my local junkyard), as well as a z32 unit all do not have this continuity, but they pass all the other sr20 tests. can someone with a known working q45 ignitor and a multimeter just check this for me real quick?

08-13-2007, 03:17 PM	#1
aNskY Nissanaholic! Join Date: Apr 2005 Location: NY Age: 40 Posts: 1,604 Trader Rating: (10)	running a q45 ignitor? help me out according to the sr20 fsm, the pins on the input side of the ignitor are supposed to have continuity with the ground (5th pin). now all the q45 ignitors i have found (there was 5-6 at my local junkyard), as well as a z32 unit all do not have this continuity, but they pass all the other sr20 tests. can someone with a known working q45 ignitor and a multimeter just check this for me real quick?