Quote:
Originally Posted by SYKORB26
Just to clear up a few things. The transmission tunnel clearance issue is applicable to any kit you chose. With the SYKO kit, there is adjustment to move the engine front or rear in order to clear the tunnel. However, if you chose to set the engine as far rearward as possible, at some point, the area of the bellhousing close to the starter will be the first spot to come in contact with the firewall. We've designed the Syko kit to situate the engine as low as possible in order to maximize the clearance in this area. In short, if you set the engine to it's rearmost position it will interfere with the firewall. However, in most cases, the engine can be installed without any modification to the firewall.
Sincerely,
Gary Narusawa
SYKO Performance
|
I would just like to say that the RB26 kit works flawlessly. Gary is not just a great friend but also the most reliable trustworthy person out there!! I can vouch that his product is simply "flawless". Driveability is an absolute "perfection".