Quote:
Originally Posted by I'm Redline
240 down for LIMP MODE
OK heres the online diagnosis for you guys(HAHAHAHAHA)
240 goes into limp mode upon starting
MAF, MAF wires are good, plug is connected well.
Car was ran low on oil, changed, ran fine for a minute, then back to limp
I checked it made sure everything was tight, checked the fsm, but can find nothing.
Yes it needs to go get plugged in.
My first guess after sleeping on it is a bad oil pressure sensor. Would that cause limp mode?
|
Knowingwhich engine you have would be nice.
Check for ECU codes. Oil pressure switch won't cause anything.