The other day I was asking around if anyone had access to a MIG welder, I needed to get my spot welds literally buttoned up where they unhinged. I was jacking up the front end of my car on the tow point and the sheet metal folded back...
My buddy Nick came by in a pinch and offered to button it up. Took us about 45 minutes to get it patched up. Well, I help jack the car up and pull the wheel... I'm very thankful Nick helped me out and I owe him big time.
Thule roof rack with big mouth bike attachment went on about a month ago.
and here's my T25 with 550cc injectors waiting on a few parts.
Once I get my wideband in, and weld in vacuum nipple (for the wastegate actuator) I'll be taking in my oil pan, hotpipe, and downpipe to Galen Callahan and he'll patch in a few bungs.
I'm planning on getting the NismotronicSA and converting the KA to speed density... The 3bar MAP is $80 and IAT is $30 plus I'll need to figure out how to wire in the two... MAP sensor needs a capacitor for 5v and IAT needs a weld in bung... I might put that off until later and stick with the MAF.