PDA

View Full Version : car wont run...


slamdawg543
10-19-2005, 08:47 PM
ok, since the car last ran in prestine order, i have added a t28, 550s, enthalpy tune, and z32 maf. after the install of these, i had a minor problem of the idle dipping/dying after rev's sort of like a vented bov syndrome, now the car's problem has incresed, and now will not run at all...

on start up it runs fairly normally for 3-5 seconds then chokes itself and dies. various popping occurs, and black smoke exits the exhaust before it dies

things i have checked...
-maf wiring
-timing
-unplugging the maf does pretty much nothing
-checked the injectors for leaks
-checked ecu for codes just pulls code 55
-checked for boost leaks
-tried cleaning the iacv
-i even sent the ecu back to enthalpy to check it out, and it checks out fine.

Some one please help...!

slamdawg543
10-23-2005, 08:37 PM
just to let anyone who was interested know the problem with my car was the sparkplugs, i had asked for 91 sentra se-r spark plugs, which i guess are the wrong ones? (maybe someone can clarify) but i threw the old ones back in that i thankfully kept, and it started right up.

while im at it what spark plugs do you guys suggest i use? and set at what gap?(throw in the part number if you can)

DP_Michelle G
10-24-2005, 01:22 AM
i dont have the part number but i know that the NGK b13 se-r plugs are the ones to use on the sr20det.