Kouki headlight wiring?

[Jstyles1299]

Im doing the zenki to kouki conversion on my 95 and i wanted to no if it was a direct fit for my lights to go in or do i need to do some wiring to get them correct. Oh yeah and the same question applies to the rest of the lights on the car. Thanks

[BoLLeH]

I believe that SimpleS14 has a writeup on the wiring.

[BoLLeH]

http://members.aol.com/SimpleS14/

[nrg]

zenki and kouki HIGH beams are both the same. 9005
Zenki uses H3 lows it has two power wires and one ground. one of the power wire is for Low and the other is for High.
Kouki headlight uses h1 bulbs so it uses One power wires from Low.
You can just wire both powers from the H3 to ONE power on h1 bulb and one ground. The reason why you do this is because when you hit the HIGH beams, the low beams won't shut off.

[projectRDM]

Close. Zenki lowbeam is a 9003, or an HB4.

[BoLLeH]

zenki and kouki HIGH beams are both the same. 9005
Zenki uses H3 lows it has two power wires and one ground. one of the power wire is for Low and the other is for High.
Kouki headlight uses h1 bulbs so it uses One power wires from Low.
You can just wire both powers from the H3 to ONE power on h1 bulb and one ground. The reason why you do this is because when you hit the HIGH beams, the low beams won't shut off.

Sorry to bring back a dead thread, but for searching purposes, wiring both of the power wires together will make both the high beam and low beam lights activate when the headlights are switched on.