PDA

View Full Version : clutch slams against the floor


TOMY
08-05-2005, 02:25 PM
so i was wondering how do i bleed the system, or do I need to replace the Slave?

thx

the head
08-05-2005, 03:18 PM
bleed system same as bleeding brakes one guy running the bleeder under the car the other pushing the pedal
open bleeder
press pedal down
close bleeder
lift pedal back up
repeat until no bubbles come out of the system

if you use speed bleeders just open and pump until no air then close

kandyflip445
08-05-2005, 03:33 PM
If you clutch pedal doesn't come back up check for leaks to see if it's the MC or the slave and replace what is needed. If you haven't already you can remove the damper to make bleeding easier.

SimpleSexy180
08-05-2005, 06:03 PM
take off the damper box also and just direct connect the hard clutch line to the slave cylinder soft line

TOMY
08-06-2005, 03:41 PM
i do have a hardline. But i guess i need to put fluid in it to get the full feel.