PDA

View Full Version : Air box removal


SSJ2Gohan
04-15-2002, 08:00 PM
A long time ago i ditched the stock intake and filter for an Injen intake with a K&N cone filter.  The entire air box was removed, except for that bottom part that looks like its under the car.  Is there an easy way to get to this?  Its looks like a pain in the ass to remove but was hoping someone here could help me with some suggestions.

LanceS13
04-15-2002, 08:11 PM
Take the wheel well liner off.  It's held on by clips and screws so be careful not to break or strip them.  Taking the front left wheel off and jacking the front up helps but isn't necessary.

DSC
04-15-2002, 08:27 PM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (LanceS13 @ April 14 2002,11:11)</td></tr><tr><td id="QUOTE">Take the wheel well liner off. It's held on by clips and screws so be careful not to break or strip them. Taking the front left wheel off and jacking the front up helps but isn't necessary.</td></tr></table><span id='postcolor'>
<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> would you suggest he take the wheel off without jacking the car up?

A tip on how to get the wheel liner off (from someone who's a pro...me) be extremely careful and work at getting it off for about 10 minuets or so and then just say "hell with it" and pull! &nbsp;Works every time <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> tho it does make it difficult to put back on <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sad.gif" border="0" valign="absmiddle" alt=':('>

LanceS13
04-15-2002, 08:47 PM
lol...DSC. &nbsp;I meant it can be done with the wheel on and the car on the ground...it's just that it's a bitch to do it that way. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>

SSJ2Gohan
04-16-2002, 05:48 AM
Thanks for the info. &nbsp;Ill probably give it a shot this coming weekend. &nbsp;

I had to take a second look at LanceS13 said about taking the wheel off without jacking the car up also!

burgy240
04-16-2002, 12:02 PM
What will it do if I remove this bx (also a 95) &nbsp;but stay with the stok filter box? &nbsp;Will it make any differene in HP? &nbsp;will i hurt the car at all? &nbsp;please help as my front bumper is off and the box is removed...hehehe &nbsp;thanks

tnord
04-16-2002, 12:07 PM
i removed my resonator box and only have the y-pipe on there with a K&N inside the stock box right now, sounds good and just the removal of the box might give you a couple hp, and better throttle response