SR20DET - Redtop vs. Blacktop

[ledzep]

What is the difference between an S14 SR20DET redtop and blacktop?  Please let me know all the differences, pros and cons.  Im thinking about doing a swap.  Thanks

    -Daniel

[DSC]

Got this from a few pages back (http://www.zilvia.net/f/cgi-bin/ikonboard.cgi?act=ST;f=2;t=7945)

[s14boi]

and just to make it a lil easier for u if you're lazy...

SR20DET specs (http://srswap.com/faq_specs.htm)

if i were u i'd bookmark that site, those guys know quite a bit
it's www.srswap.com

[ledzep]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (s14boi @ April 13 2002,6:29)</td></tr><tr><td id="QUOTE"></td></tr></table><span id='postcolor'>
Is a S15 motor a direct boltup to a S14? &nbsp;Whats involved with the swap? &nbsp;I was just thinking a blacktop S14 engine, 220 hp. &nbsp;I plan on doing a bigger turbo and injectors anyways. &nbsp;Thanks

BTW hopefully this will be in a 97 s14.

&nbsp;-Daniel

[s14boi]

S15 will fit in the same as an S14... if u go S15 most ppl usually use the S14 5-spd instead of the S15 6-spd for stregnth reasons.
but if you plan on upgrade bigger turbo/injectors it'd be more cost efficient to go w/ the older engine it will easily surpass the S15 stock hp by puttin in about the same amount as u would spend extra for the S15 engine. &nbsp;anyway u go about it, good luck an post ur results &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>

[gsrcamel]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (s14boi @ April 13 2002,8:12)</td></tr><tr><td id="QUOTE">S15 will fit in the same as an S14... if u go S15 most ppl usually use the S14 5-spd instead of the S15 6-spd for stregnth reasons.
but if you plan on upgrade bigger turbo/injectors it'd be more cost efficient to go w/ the older engine it will easily surpass the S15 stock hp by puttin in about the same amount as u would spend extra for the S15 engine. anyway u go about it, good luck an post ur results <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'></td></tr></table><span id='postcolor'>
Never heard of anyone not using the S15 tranny for strength reasons?!? I know 3+ guys that did not use the tranny because a 6spd is exactly what you DON'T want in 90% of all turbocharged cases. Turbos like long gears simply said. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sly.gif" border="0" valign="absmiddle" alt=':sly:'>

[rotaryknight]

The S15 tranny is not very strong. &nbsp;It only handles about 300 rwhp then craps out. &nbsp;Also from what I know the speed sendor is in the Tranny so it's also a pain to install.

[crazycuban]

Blitz S15, with 6 speed, 425 rwhp. &nbsp;It can be done.