Do they make this or am I making it up?

[Wahl 36]

Im looking for a part that looks like this.


http://img287.imageshack.us/img287/6740/newbitmapimage6lt.th.png (http://img287.imageshack.us/my.php?image=newbitmapimage6lt.png)
I dont know if there is such thing but I just replaced my T28 with a GT2871R and the oil return pipe doesn't bolt up because the actuator is in the way due to the angle.

Anyways, the picture basically describes the part. Anyone know were I can get one of these???

[spoolin240sx]

Are you looking for something like this?
http://static.summitracing.com/global/images/prod/large/aer-fbm1202_w.jpg
Thats what I used but it was 1/2 NPT to a hose barb I dont recall what size barb tho. Hope this helps.

[Wahl 36]

Are you looking for something like this?
http://static.summitracing.com/global/images/prod/large/aer-fbm1202_w.jpg
Thats what I used but it was 1/2 NPT to a hose barb I dont recall what size barb tho. Hope this helps.


Yes!! Exactly!!! Were do you get something like that??

[spoolin240sx]

I ordered mine from summit racing, just go there and search for "an to hose barb fitting" theres a lot to chose from.

[go240]

you can get stuff like that at home depot or lowes sometime

[statik]

the oil return tube is hitting the wastegate? that sounds odd, did you clock the turbo correctly?

[Wahl 36]

the oil return tube is hitting the wastegate? that sounds odd, did you clock the turbo correctly?


Yea, I had to rotate the housing but since the angle is so great on the oil return it touchs the actuator. If the angle was reduced it would work fine. Im acutally have tempted to cut it off lower and use a longer hose.

[KiDyNomiTe]

Just go to a hardware store like Ace or Home Depot, they have those, just make sure its the right size.