89-90 fender same as 91-94

[Mr. Spool]

I am wondering if the fenders from the 89-90 are the same as the 91-94 thanks.

Spool

[sLip techniques]

only difference is 91+ have the fender valence to make the bumper flush. I need those by the way....

[vinhisbored]

Yes they are, the only difference that is very obvious is the bumper, but I do believe that the fenders of all S13's are the same.

[TheSnail]

The studs on the bumper and the holes in the fender vary, the top 2 10's will work, the bottom 10 will work, one of the 10's in the middle will boltup with guiding with a flathead, the other 10 is way off.

[!Zar!]

I tried to fit a 89 fender on my 93 and it fit well, but it doesn't line up 100% But isn't ugly. I'll try to post some pics up tomorrow if I have the time.

[Mr. Spool]

So I guesse is it possible to use my 89 fender and have it not be to noticible, I will be using an aftermarket bumper on the front.

Also are both of the bumpers equally wide. thanks.

[TheSnail]

Its fine, at worst, there will be a very small gap in the middle.

[IAM_SO_sLOw]

only difference is 91+ have the fender valence to make the bumper flush. I need those by the way....

yuppp!!...thats what im runing lol i kept the plastic piece off my broken fenders =)

[Mr. Spool]

I am completly lost, I have pulled my fair share of fenders before, but am now at a loss, where should I look to see the gap at. Thanks.

[TheSnail]

There shoulnt be a gap, at wosrt there will be. One of the bolts wont go through the fender, and if you dont push it out but sandwitch it, there will be a nice juicy gap.

[exitspeed]

I found a difference between a zenki coupe and hatch fender.