PDA

View Full Version : are these Tein tie rods?

publicenemy137
04-21-2005, 02:45 PM
http://x2.putfile.com/4/11015404913.jpg

http://x2.putfile.com/4/11015420155.jpg

http://x2.putfile.com/4/1101542229.jpg

http://x2.putfile.com/4/11015425629.jpg

http://x2.putfile.com/4/11015433847.jpg

http://x2.putfile.com/4/11015435828.jpg

Someone installed em said they were Moog, but it came in a Tein box, and looks like Tein to me?
the head
04-21-2005, 03:22 PM
If this is on an S13 measure the diameter of the shaft with a set of calipers if they are thicker than the stock rods they probably are
Dousan_PG
04-21-2005, 04:12 PM
ends are probably moog
tie rods are probably tein...assuming by color
does it have spacer in there too? you have to remove that boot (rubber one) to find out for sure
publicenemy137
04-21-2005, 04:18 PM
Yea it has a spacer in there. My mechanic said the spacer is small though, he said the Tein tie rods he's used to working with, the spacer usually has more room for steering adjustment. I heard there's a rumor going around though that Tein says it should be around 6 mm, but some people's spacers are at 3-4 mm?
projectRDM
04-21-2005, 08:59 PM
Gold rod ends= Tein. Moogs are black and have a Zerk fitting on the bottom.
nrg
04-22-2005, 03:18 AM
looks like tein tie rods and ends.
S14DB
04-22-2005, 04:37 AM
Gold rod ends= Tein. Moogs are black and have a Zerk fitting on the bottom.
:stupid: My Moog ends were black too.
RedSuns
04-25-2005, 08:37 PM
ends are probably moog
tie rods are probably tein...assuming by color
does it have spacer in there too? you have to remove that boot (rubber one) to find out for sure


they looked exactly like the stock rods that came off the car...except they were gold