cheapest way to get Z32 calipers

[CoasTek240]

so i've already invested a ton of money on brake parts, and 300zx wheels, and tires, and spacers, and a lot of other goodies. i still havent bought the z32 calipers that i want....

this is what i want. *a rebuilt oem caliper 30mm or
*a rebuilt and powdercoated/painted

does anyone know where to get the full rebuilt z32 30mm calipers. for the front.
thanx in advance

[Ritz S14]

Calipers/lines/pads/rotors/brake fluid will run you about $300

I did a write up on this... Piecing it myself. But if you buy them all at once at a junkyard you'll save a ton of money. But not everyone has the liberty and luck to find a z32 at the wrecking yard with good parts in tact.

[SirWarrior]

I was one of the lucky ones that found a 90 NA Z32 and got the whole suspension/pumpkin/MAF/Brake MC and wheels with good rubber for mere $400

But if you look in Autozone, they got reman Z calipers for 55Each plus core. That was what I was planning on doing untill I came accross the Z in the yard.

[CoasTek240]

so, if i could just find a cheap set of z calipers, i can buy remanufactured ones at an auto parts store, and then i would need to paint them or get them powdercoated....

i may do that. are there any other suggestions?

[OptionZero]

If your local store is particularly stupid, you might be able to turn in your 240sx calipers as the core instead of getting 3Z ones.

[CoasTek240]

If your local store is particularly stupid, you might be able to turn in your 240sx calipers as the core instead of getting 3Z ones.
yeah, i had heard about this. I might give that a try.

If i can find a fully built remanufactured caliper, then i suppose i could paint them myself.

looks like ill have to go with this method, if no one else comes up with anything else.

[kouki2g0]

http://www.zilvia.net/f/showthread.php?p=595311#post595311

this is where i got mine