PDA

View Full Version : WTB: Help desecrate my virgin s13.


bisoo369
03-28-2017, 03:36 PM
I can't hold off any longer, 2 years with a stock s13 is enough for me. I'm keeping it forever so I don't feel so bad. This is a pretty "nissanroadracing.com" list but bear with me. car is an s13 hatch

looking for:
--5 lug
--r33 ebrake set up
--aluminum z32 uprights
--aluminum z32 calipers f&r
-- DEFSPORT spherical upright bearings for z32 uprights
--mint s14/r32 GTR wheels
--SPL/battle version/ bings (quality) rear arms (all)
--SPL tension rods
--HICAS rack! (I'll pay up. I want this bad.)
--powerbrace of some sort
--fender braces
--r32 GTR seats
--cool floor mats (something cool/jdm/novel that would give me zilvia rep)
--koni 8610 (yellow)/ground control set up. Ill consider any road race oriented set up under $1500
--C's short shifter (only C's)
--cool shift knob (by cool I mean some OG shit like the floor mats)

only looking for very good, almost new and new parts (z32 brake stuff doesnt have to be perfect just properly working). if you have anything else interesting feel free to message me. This build will be along the lines of a grip/street car. located in Chicago. Thanks

e1_griego
03-28-2017, 03:50 PM
. This is a pretty "nissanroadracing.com" list but bear with me.

This build will be along the lines of a grip/street car.



Subscribed.

Recommend spindles over HICAS rack just for cost/ease of finding. Plus roll center correction is real nice to have.

FRSport.com
03-28-2017, 06:30 PM
I have the 5 lug conversion hubs (http://www.frsport.com/index.php?target=catalog&mode=searchImproved&q=s13+5+lug+hub), R33 e brake cables (http://www.frsport.com/index.php?target=catalog&mode=searchImproved&sort_by=0&sort_order=desc&q=r33%20brake&isu=Yes&instock=0&mfgs=55), Nagisa fender brace (http://www.frsport.com/Nagisa-XNG0070-Gacchiri-Fender-Support-Brace-240sx-1989-1994_p_12950.html) and suspension arm options (http://www.frsport.com/index.php?target=catalog&mode=searchImproved&sort_by=0&sort_order=desc&q=s13%20arm&isu=Yes&instock=1). Nismo power braces are inbound from Japan.

Shoot me a message if you have any questions. Please let me know what I can do to help with the build!

Thanks!

bisoo369
03-28-2017, 06:55 PM
I was hoping you'd come in here el griego. I was actually going to model this build somewhat like that blue hatch you sold whenever that was. Thanks for the tip about the spindles, are you talking about custom ones instead of the hicas rack? I know GKtech are 800 or so for the pair. Maybe you could shoot me a PM to point me in the right direction

e1_griego
03-28-2017, 10:44 PM
Yeah I was going to say, your parts list is basically my hatch, give or take.

Nearly two years later I sorta regret parting it out.

Yeah, you can just do some simple cut and weld spindles, or spring for something like PBM or GKTech. Shortening the steering arm on the knuckle by 1/2" makes for 2.25 turns lock-to-lock.

OddyseusDSM
03-29-2017, 10:09 AM
I have z32 uprights, hope i see you out on the track

Reece
04-03-2017, 11:54 PM
What are you willing to spend on R32 wheels?