h11m1vn
08-02-2016, 06:19 AM
Need a few things to finish up my KA24DE engine build:
- At least 4 of the bolts that attach the engine mount brackets to the block.
- 5spd dust shield/plate that goes between the engine & transmission
- Clutch alignment tool
- EGR & canister control valve wire harness. This is a 2 wire harness about 8" in length located at the rear of the intake manifold. This item might be specific to the emmisions on my engine (95'). I don't need this part as bad, but I can send a pic if you need help identifying it.
I would like to save on shipping charges so only contact me if you have more than 1 of the items above. I can be reached via txt @ 4796222062.
- At least 4 of the bolts that attach the engine mount brackets to the block.
- 5spd dust shield/plate that goes between the engine & transmission
- Clutch alignment tool
- EGR & canister control valve wire harness. This is a 2 wire harness about 8" in length located at the rear of the intake manifold. This item might be specific to the emmisions on my engine (95'). I don't need this part as bad, but I can send a pic if you need help identifying it.
I would like to save on shipping charges so only contact me if you have more than 1 of the items above. I can be reached via txt @ 4796222062.