180sx kouki bumper position lights as blinkers!?!?

[136baker]

Can someone please link me to a thread that explains how to make the kouki bumper position lights into the blinkers? I recently got a bumper that fits te lights but I don't want my stock blinkers zip tied into the bumper and id rather use the bumper lights! Thanks!

[slow40sx]

When you buy the position lights is they are the OEM ones they come with the bulb and plug and the pig tail hanging off the plug, you literally just cut the plug off for the stock turn signal, solder the 2 power wires from the turn signal to the 2 power wires on the position light pig tail and then there is a 3rd wire on the factory side of the harness it's a ground and you can tape it up and leave it or ground it somewhere so your blinkers blink at a normal speed otherwise they'll blink fast like they do when you have a burnt out turn signal bulb

[slow40sx]

There's literally no way to fuck it up, I tired it wires both ways and it changes nothing, either way works

[136baker]

When you buy the position lights is they are the OEM ones they come with the bulb and plug and the pig tail hanging off the plug, you literally just cut the plug off for the stock turn signal, solder the 2 power wires from the turn signal to the 2 power wires on the position light pig tail and then there is a 3rd wire on the factory side of the harness it's a ground and you can tape it up and leave it or ground it somewhere so your blinkers blink at a normal speed otherwise they'll blink fast like they do when you have a burnt out turn signal bulb

I have them oem but they didn't come with pigtails, I just have the bulb with the socket

[slow40sx]

I have them oem but they didn't come with pigtails, I just have the bulb with the socket


the wires are cut off clean at the back of the socket?

[136baker]

the wires are cut off clean at the back of the socket?

Yea right at the base of the clip lmao I bought them off someone, I'll probably just go to the dealer and buy the pig tails. Or can I just use female connectors or the bulb?

[FaLKoN240]

http://www.phase2motortrend.com/product-p/p2-n180fcl02-jy.htm

[slow40sx]

That ^ or you could unpin the socket and repair the pins by lengthening the wires, although that would be a massive pain in the dick

[136baker]

got it to work! Thanks guys!:)

[slow40sx]

glad to hear it