PDA

View Full Version : Grip Royal Steering wheel install


USAFs13
02-27-2015, 10:36 PM
So installed my new steering wheel today (Grip Royal with Splash SRS hub standard size) and can't figure out the horn button. I have one of the plugs plugged in but there is a second one that I have no idea where it goes or if it even needs to be hooked up. Seen all the other install threads but haven't seen this part addressed in any of them. I can take pictures if needed.

USAFs13
02-27-2015, 11:06 PM
This is on a s14 btw

fatduece
02-28-2015, 12:13 AM
Its not working cuz its griproyal. You need a real steering wheel, like nardi.

USAFs13
02-28-2015, 07:51 AM
That helps a lot..... Return the wheel for another wheel and magically the horn works lol.

5280VertDET
02-28-2015, 08:36 AM
http://importnut.net/steeringswap.htm

Google: How to wire horn button 240sx.

USAFs13
02-28-2015, 08:46 AM
I actually looked at that a few times but with the horn button being different I was hoping I didnt have to do that. The grip royal button comes with 2 wires attached to the back. One wire clearly hooks up to one of the wires left over from when you remove the old steering wheel. The second wire would have to go on to a tab or something kinda of like what is shown in the link above (metal tab he fabbed and put behind the hub). Ive also seen some hubs that have that tab built in. One a video and not sure if it is s13 specific but they were saying that there are metal contacts behind the hub that have to be in a certain spot or the horn will not work.

s0fa king
02-28-2015, 09:19 AM
ones for the horn, one is for the ground. make sure its touching something metal.

omgRWDgoodness!
02-28-2015, 09:22 AM
Its not working cuz its griproyal. You need a real steering wheel, like nardi.
Thank you. Don't buy fu**ing junk.

USAFs13
02-28-2015, 09:48 AM
Anyone care to explain why Grip Royal is so bad?

USAFs13
02-28-2015, 09:54 AM
Thanks SofaKing gonna try to metal tab method later today and see if that works.

dizzariot
02-28-2015, 10:26 AM
I just tape mine to the inner wall of the hub...fabulous :keke: