PDA

View Full Version : Another sr20 thread


xjshake
06-11-2014, 12:51 AM
Well I recently purchased a said "good running sr20det" that I installed only to find all mains and rod bearings trashed so I rebuilt the engine and now for the life of me I can not get it to start... I honestly couldn't tell you guys how many times I have pull the cams and reset the timing with no luck... All coil packs are giving spark and all fuel injectors are spraying.. I am getting 90ish compression on cylinders 1 and 2 but about 155 on cylinders 3 and 4... One thing that popped into my head tonight was that some of my lifters wouldn't compress like the others... would that cause my cams to keep my valves open? I would really appreciate any tips or thoughts

Kingtal0n
06-11-2014, 10:26 AM
if your compression test is inconsistent do a leakdown test next, with emphasis on finding out where your air is exiting.

xjshake
06-11-2014, 08:59 PM
Alright I will look into that at well... thanx