PDA

View Full Version : Frist time at the strip w/ my s14


AenjukuCar
06-20-2004, 11:10 PM
Well I went on saturday to the drag strip. This was at Beaver Springs Drag Strip. A local shop out of Dillsburg (Dynamics Motorsports) Rented the track. You could make as many passes as you felt like for 30bucks. All in all I had an impressive day, being the second fastest street car their. I made around 13 to 15 passes, I'll post up my best with stock boost, low boost, high boost. Didn't play with tires at all, should have dropped the air pressure, totally foregot about doing that. I had 17's on the front with brand new kuhmo escta's 215/40's 17's on the back I had the stock 16's with like 38lbs of air in. On the reaction time, a perfect is zero's across the board.

Temp. was around 78degrees.

Stock Boost runs: 7lbs
R/T: .514
60': 2.914
1/8: 10.533
mph: 75.99
1/4: 15.577
mph: 99.18

R/T: .204
60': 2.926
1/8: 10.621
mph: 77.92
1/4: 15.506
mph: 102.69


Low Boost: 10lbs
R/T: .308
60': 2.696
1/8: 9.516
mph: 81.46
1/4: 14.266
mph: 104.99

R/T: .047
60': 2.441
1/8: 9.264
mph: 81.44
1/4: 14.002
mph: 101.90

R/T: .017
60': 2.887
1/8: 9.751
mph: 81.19
1/4: 14.525
mph: 104.35


High Boost: 14lbs
R/T: .233
60': 2.325
1/8: 9.021
mph: 81.96
1/4: 13.749
mph: 105.52

R/T: .298
60': 2.108
1/8: 8.759
mph: 82.25
1/4: 13.468
mph: 102.38


I'm going to be going back to the track next month, but i'll have a Greddy intake manifold on and have the cat, taken out and have a 3'' piece of pipe put in and have my 550cc Nismo injectors on with a z32 MAF.

TurK
06-21-2004, 03:05 AM
sweeeet doood....what kind of moddings did u have?

Edit: nvm just looked at ur cardomain...nice times doood....was this ur first time at the track?

AenjukuCar
06-21-2004, 05:42 AM
Yep, it was my first time, with my S14. when I went up I made sure, to burn out in the water, get about two full rotations with the tires in the water, and make sure you reach second gear. Then stop really quick, and burn out a lil' again to get the water off.

theicecreamdan
07-13-2004, 11:47 PM
if you're running on street tires try to avoid the water completely and just do a little burnout to get any stuff off ur tires before you make ur pass,,, that will help your 60ft time a lot I think.

knightrider
07-14-2004, 07:27 PM
if your running street tires, burning out only makes them grip less, and running 38 psi cold doesnt help much either, your 60 ft shows just that,

theicecreamdan
07-15-2004, 11:10 PM
its still a good idea to do a quick spin to get any crap off ur tires,

Also to help with launches, pull off the front sway bar next time you go to the track,

KA240SX808
07-18-2004, 08:32 PM
Wow thats good for little mods like that :D

Brian W.
08-04-2004, 05:44 PM
should be ETing in the low 13s with 105 MPH. work on those 60 ft. times. i agree if on street tires, no water... jsut one lil spin to get crap off tires.

Bryants95240sx
08-04-2004, 09:57 PM
i see on your stock boost you were running 10.5-10.6 in the 1/8th i ran a 10.9(1/8th)with my stock ka deff. should have deflated the tires and like they said avoid the water on street tires