Blinkers dont work, help me!!

[spyider]

ok so I got a 93 s13 vert a while ago. starting on the wiring finally..

I got the headlights to work, tail lights, brake light. headlight motors. but I cant seem to get the blinkers to work.. when I hit the emergency flasher button they all flash and work fine.. but when I try to do it with the steering column switch they don't do anything..
Also when I turn the lights on, should the blinkers light up but not blink till I put the turn signal on? because they don't do anything.

Ive already removed the switch and done the cleaning of the contacts on it. didn't seem to help, but on the section where the blinkers plug into it is still green corrosion as I cant clean that part.

im thinking its a bad switch. if anyone has had a similar problem like this let me know. ohh and the flasher relay works fine.

[Aaron240sx..]

check your fuse , i had that same problem , under drivers side dash , 3rd fuse from the bottom on the left side . 10amps

[spyider]

yes I did, that's the first thing I did.

fuse was blown. replaced it. that's when the hazards worked then..

yes key is on, and the other 10a fuse was also checked..

[Aaron240sx..]

thats weird because when my fuse was blown , my hazards still worked, then i replaced the fuse and the blinkers worked too . im thinking its your switch then

[spyider]

yea I ordered one from rockauoto.. because im 99% shure that its in that.. 50$ shipped.. cant g wrong with then for a new one..

[NHTKID]

Check your blinker fluid

[spyider]

Check your blinker fluid

you sir, are a dumb ass..

[NHTKID]

eh, its just sarcasm

[s13rhdhatch]

I have the same issue, hazards work but signals don't I took the turn signal switch off my old vert and it worked fine. Fuses are good so I'm wondering if my switch went bad.

[spyider]

yea I don't have another car to take a switch from haha.

so I just ordered one assuming its the switch. ill definitely let you guys know..