PDA

View Full Version : 1JZGTE Swapped S-Chassis thread


Spencer dougherty
08-28-2013, 11:10 PM
hi. my name is Spencer & im the CEO of SideWays Performance here in beautiful SoCal.. we are a 8000sq foot ware house drift factory..
Home - SIDEWAYS PERFORMANCE (http://sidewaysperfomance.webs.com/)

i noticed that there was no support on Zilvia.net for 1jzgte & vvti's into s-chassis or any other chassis.. so i wanted to start a page to help everyone out..

my background.. been in the JDM inport scene for a good 15 years now
& started my own shop 10 years ago.. ive done at least 1000 swaps & 200 or so jz's. i know the the parts list need, engines & wire inside & out for S-chassis swaps..
ill post up alot more tomorrow.. heres some pixs i have of jz's weve done this year and projects where working on.. also have swap videos on youtube sideways performance - YouTube (http://www.youtube.com/results?search_query=sideways+performance&oq=sideways+per&gs_l=youtube.1.0.0.8679.14440.0.16236.12.11.0.1.1. 0.1153.3534.1j7j1j6-1j1.11.0...0.0...1ac.1.11.youtube.v5zBLsc7CCo)

post up your engine bay pix with parts list & power

here are the last few S chassis 1jzgte swaps we did
mk3 supra 1jzgte. swapped the pan.. FMIC/ turbo back 3In/ comp flywheel ACT clutch/DM pulley kit/ Wired by Sideways Performance/zero lift mounts for R154.. gotta mod the trans mount a little because bolt pattern is diff on trans mount jdm vs usdm. Sideways performance Drive shaft & shifter extension/mercedes 10in pusher fan/cusco catch can/hks filter..

http://i167.photobucket.com/albums/u136/driftready1/IMG1306.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1306.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG1308_zps84643956.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1308_zps84643956.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG1307_zps57ab85f4.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1307_zps57ab85f4.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG1282.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1282.jpg.html)

http://i167.photobucket.com/albums/u136/driftready1/IMG1513_zps444810d8.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1513_zps444810d8.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG1515_zpsbee8dfa4.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1515_zpsbee8dfa4.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG1517_zpsf6a1f4c9.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1517_zpsf6a1f4c9.jpg.html)


http://i167.photobucket.com/albums/u136/driftready1/IMG1623_zps07081969.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1623_zps07081969.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG1676_zps14b9609d.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1676_zps14b9609d.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG1677_zps892e6c55.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1677_zps892e6c55.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMAG0080_zpsc9f94ae1.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0080_zpsc9f94ae1.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMAG0082_zps06f99ada.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0082_zps06f99ada.jpg.html)

my good friends s14 1jz full build.. sent out for inside & out paint today 8/28/13
http://i167.photobucket.com/albums/u136/driftready1/IMG1166_zps971cd752.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1166_zps971cd752.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG952_zps1202618f.jpg (http://s167.photobucket.com/user/driftready1/media/IMG952_zps1202618f.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMAG0246_zps5a8a07f4.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0246_zps5a8a07f4.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMAG0248_zpsbea66d1f.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0248_zpsbea66d1f.jpg.html)

Some 1jz Swap we just finshed.. cool stuff
MK3 Suppra R154 1jzgte
http://i167.photobucket.com/albums/u136/driftready1/IMG1386_zps80f2e965.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1386_zps80f2e965.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG1388_zps31d0a0be.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1388_zps31d0a0be.jpg.html)
MK3 Sopra R154 1jzgte went to paint last week 8/20/13
http://i167.photobucket.com/albums/u136/driftready1/IMG1841_zps3b29a0b8.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1841_zps3b29a0b8.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG1842_zps1b47a6f1.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1842_zps1b47a6f1.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG1149_zpse0211c00.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1149_zpse0211c00.jpg.html)
MK4 suppra with a JZX100 1jzgte vvti
http://i167.photobucket.com/albums/u136/driftready1/IMG1559_zps7fa7dd20.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1559_zps7fa7dd20.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMAG0251_zpse7c5dcc3.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0251_zpse7c5dcc3.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMAG0252_zps0df2c098.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0252_zps0df2c098.jpg.html)
RX7 FC3s 1jzgte R154 Drift Missile
http://i167.photobucket.com/albums/u136/driftready1/IMAG0250_zps90ee7a72.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0250_zps90ee7a72.jpg.html)
X7 Cressida Wagon 1jzgte vvti Auto
http://i167.photobucket.com/albums/u136/driftready1/IMAG0123_zps21599c57.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0123_zps21599c57.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMAG0142_zpsa1cd68d8.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0142_zpsa1cd68d8.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMAG0150_zpsdd37337b.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0150_zpsdd37337b.jpg.html)
X8 cressida 1jzgte vvti r154
http://i167.photobucket.com/albums/u136/driftready1/IMAG0130_zpse8b5483c.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0130_zpse8b5483c.jpg.html)

Here is a 2jzge na 5speed mk4 & sc300 vs on the bottom a jzx90/100 1jzgte r154 5 speed both of these trans fit into any S-Chassis, sc300, mk4 & cressida with no shifter extenstion needed.. both trans's are hard to find
http://i167.photobucket.com/albums/u136/driftready1/IMAG0174_zps017e1489.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0174_zps017e1489.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMAG0176_zps68747392.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0176_zps68747392.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMAG0175_zpsd7df2305.jpg (http://s167.photobucket.com/user/driftready1/media/IMAG0175_zpsd7df2305.jpg.html)

BigPawr
08-29-2013, 06:23 AM
There is already a 2JZ swap thread that has a Plethora of information pertaining to the JZ swap in general for the S-Chassis. I'm not really sure what can be accomplished by this thread other than advertising your own business.

Spencer dougherty
08-29-2013, 01:36 PM
I see that.. It is a 2jz theard. Not a 1jzgte. Aside from the motor mounts & transmission . The 1jz's & Vvti's are completely different . The pont is to help out not to promote my shop. Only reason I mentioned my shop is to show my experience & that im not talking out my ass...,im slammed out the door with work. + Im in socal so I dont see any swap comming in because of this post. I only do swaps. I dont sell new parts. So when I have more time I will post up a gold rush of details for everyone.

di-devol
08-29-2013, 01:36 PM
Actually, I like this idea, although there are similarities between 1j/2j, the other thread IS directed at 2j's.

(Especially since I'm doing a 1j)

The other thread isn't stickied either.

benarovi
08-29-2013, 01:55 PM
I like this idea. 1jzs are awesome swaps and pretty cheap.

xoxide
08-29-2013, 06:32 PM
In for wiring diagram's and parts list!

soundboy
08-29-2013, 08:55 PM
In for the wiring diagrams also. I want to buy a is200 lexus and do a 1jz automatic swap. With a hx35

Sent from my GT-P3110 using Tapatalk 4

Spencer dougherty
08-30-2013, 12:54 AM
if u use the auto trans that comes with the 1jzgte u pick, wiring should be easy.. u don't have to wire anything extra to get the auto trans working.. as long as all the sensors are plugged in on the trans it will shift fine..OD will not work unless u wire it but its only 2 wires.. i have a book with all my diagrams in it.. gotta clean it up so u guys can read it.. takes some pixs & upload.. need a few day.. got 2 kids & a full time shop i run

soundboy
08-30-2013, 01:21 AM
Awesome. Take your time mate, just try to help us out

Sent from my GT-P3110 using Tapatalk 4

di-devol
08-30-2013, 11:19 AM
if u use the auto trans that comes with the 1jzgte u pick, wiring should be easy.. u don't have to wire anything extra to get the auto trans working.. as long as all the sensors are plugged in on the trans it will shift fine..OD will not work unless u wire it but its only 2 wires.. i have a book with all my diagrams in it.. gotta clean it up so u guys can read it.. takes some pixs & upload.. need a few day.. got 2 kids & a full time shop i run

Take your time man!

Were I'm at:
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/486081_143032719199108_1031601217_n.jpg

https://sphotos-a-sea.xx.fbcdn.net/hphotos-prn2/7065_172122602956786_1512228530_n.jpg

Wiring is being installed this Sunday.

Bushido
08-30-2013, 12:04 PM
What is the average cost of a 1jz 5 speed swap into a s chassis, in your experience.

BiG MiKE86
08-30-2013, 12:19 PM
Were I'm at:
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/486081_143032719199108_1031601217_n.jpg

Wiring is being installed this Sunday.

What throttle cable did you use? Could you take a few shots of the wiring routing :) btw whos doing your wiring?

di-devol
08-30-2013, 01:19 PM
What throttle cable did you use? Could you take a few shots of the wiring routing :) btw whos doing your wiring?


It;s a stock s13 singlecam cable. I just cut and crimped the end of it at the pedal.

I plan on taking pictures of the wiring being installed. The engine harness and install is being done by Fiend performance, chassis harness is custom.

driftlife.son
09-10-2013, 12:50 PM
Anyone wanna share some wiring information???

rune1241
09-11-2013, 05:42 PM
Seriously, the wiring is what I need help with as well.

BiG MiKE86
09-13-2013, 02:53 PM
on the fan issue i run mercedes duel BB pusher fans find them in the junk yard all the time $60
thats them in the pix below.. works supper well on all our swaps

http://i167.photobucket.com/albums/u136/driftready1/IMG1275.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1275.jpg.html)
http://i167.photobucket.com/albums/u136/driftready1/IMG1305.jpg (http://s167.photobucket.com/user/driftready1/media/IMG1305.jpg.html)
What year model do these fans come from? Any modifications required to make them fit?

ska
09-17-2013, 06:12 PM
It;s a stock s13 singlecam cable. I just cut and crimped the end of it at the pedal.

I plan on taking pictures of the wiring being installed. The engine harness and install is being done by Fiend performance, chassis harness is custom.

Where the pictures at? 😊

VegasDrifterS13
09-23-2013, 11:24 PM
Which 1JZ swap is better? VVTI or NON VVTI? I know that for tuning purposes variable valve timing can be an advantage but is one or the other built better? any differences i.e. power capabilities, strength, reliability, limits, CONS of any sort for either??? any info would be great.

edmorl
09-24-2013, 01:29 PM
anyone ever retain A/C with a 1jz swap ?

soundboy
09-24-2013, 07:24 PM
Go with the vvti. More modern engine.

Sent from my GT-P3110 using Tapatalk 4

MattSilva
09-26-2013, 11:07 AM
Alright guys really noob question but usually how much to 1jz swaps come out to be after getting everything you need and also where do most people get their engines from?

di-devol
09-27-2013, 12:16 AM
I got mine from JDM texas I believe. Price is variable.

I figured at least 4k for a swap, MINIMUM.

MattSilva
09-28-2013, 09:07 PM
I got mine from JDM texas I believe. Price is variable.

I figured at least 4k for a swap, MINIMUM.

Thanks man! Time to start saving up:naughtyd:

xoxide
09-29-2013, 05:20 PM
I got mine from JDM texas I believe. Price is variable.

I figured at least 4k for a swap, MINIMUM.
Texas JDM Engines - Direct Importer of Japanese Engines (http://www.texasjdmengines.com/)

^These guys?

BiG MiKE86
09-30-2013, 07:46 AM
Whats goin on with this thread? seemed to have some potential at first... not soo much now

FutureFab
10-08-2013, 01:59 AM
Here is my 1jz vvti swapped into my s13.

Parts list:
Jzx100 engine and 5 speed R154 (this trans is factory extended unlike older r154)
Spec stage 3 pull type clutch
Arp flywheel bolts
DSS Aluminum 1 piece drive shaft
Griffin Alum radiator
Garrett 18x11x3 Ic core, made my own tanks
Alum charge piping
Freshen up all seals and gaskets besides headgasket
New water pump, timing kit, plug wires
Earls -16 radiator lines
Earls -6 fuel lines
Earls -10 water cross over
Drift motion steel turbine exhaust wheel upgrade/360 degree bearing upgrade
Custom stainless downpipe that bolted on 22ft/lbs and 26 hp on stock boost.
3 inch stainless exhaust

As pictured made 295ft lbs and 313hp on stock ecu and wastegate, no tuning or boost controller.


http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/268A207D-orig_zpsbf916706.jpg (http://s1083.photobucket.com/user/2weldit/media/Snapbucket/268A207D-orig_zpsbf916706.jpg.html)

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/85A681DD-orig_zps0b2809a5.jpg (http://s1083.photobucket.com/user/2weldit/media/Snapbucket/85A681DD-orig_zps0b2809a5.jpg.html)

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/3CDF4ED6-orig_zps0f3fb890.jpg (http://s1083.photobucket.com/user/2weldit/media/Snapbucket/3CDF4ED6-orig_zps0f3fb890.jpg.html)

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/C6B71804-orig_zpsa748aac7.jpg (http://s1083.photobucket.com/user/2weldit/media/Snapbucket/C6B71804-orig_zpsa748aac7.jpg.html)

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/5E52E856-orig_zpsdec23ccb.jpg (http://s1083.photobucket.com/user/2weldit/media/Snapbucket/5E52E856-orig_zpsdec23ccb.jpg.html)

This is the pipe I made. I did back to back dyno test stock vs mine, only changing the pipe and it made 22ft lbs and 26hp. I made a 3 inch pipe from stock 3 bolt outlet to where my v band connected on exhaust for the stock one. This way it would be fair comparison. I was actually worried at first when the stock one put down 273ft lbs and 287hp. Then I put on mine and it made more power everywhere in the power band and extended peak torque 250 rpm. I believe this pipe is better than the tomei unit, as that one makes 30hp gain, but they are running 23.5psi boost, where mine made 26hp gain on stock ecu/boost. Im sure mine would shine even more with elevated boost and ecu tuning.

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/3C41DCD7-orig_zps26ce54e5.jpg (http://s1083.photobucket.com/user/2weldit/media/Snapbucket/3C41DCD7-orig_zps26ce54e5.jpg.html)

http://i1083.photobucket.com/albums/j398/2weldit/Snapbucket/699F88E8-orig_zps091e9bbd.jpg (http://s1083.photobucket.com/user/2weldit/media/Snapbucket/699F88E8-orig_zps091e9bbd.jpg.html)

93egallmotor
10-12-2013, 04:30 PM
im in for the VVTi info, just picked up an s14 and ive been looking for a thread for this swap or at least some info.

Black R
10-12-2013, 05:47 PM
What year model do these fans come from? Any modifications required to make them fit?


This please.

FutureFab
10-21-2013, 06:35 PM
1jzgte VVTi JZX100 harness diagram (http://www.supraforums.com/forum/showthread.php?635253-1jzgte-VVTi-JZX100-harness-diagram)

Good thread with lots of wiring info for vvti 1j.

Night drifte89
10-24-2013, 12:15 AM
Question, I have a 1jz non vvti and I am purchasing a non ac serpentine bbelt and on drift motion they ask me if I have a clutch fan or hydro fan. Don't exactly know what the hydro fan is. Which one do I need? I'm ussuming since I don't know what a hydro fan is. I don't have it?

VIPDRFT
10-24-2013, 07:02 AM
The non-vvti 1JZ uses a hydraulic powered cooling fan for the radiator. Said hydro fan runs off a pump that is part of the water pump assembly. You have two option, you can try to find a stock hydro fan (good luck) and run it, OR you can cap off/recirculate the hydro fan pump and just run electric fans. Most people convert from the 1jz hydro fan/water pump to the 2JZ water pump/clutch fan or electic fans.

Night drifte89
10-24-2013, 07:08 AM
So which belt do I buy to use the electric fans I have?

VIPDRFT
10-24-2013, 07:30 AM
If you're going to keep the existing hydro fan/water pump assembly, recirculate/loop the hydraulic system and run electric fans; obviously, you're going to get the hydro fan related belt. If you're going to switch to the 2JZ water pump with a clutch fan or electric fans; you're going to get the clutch fan related belt.

93egallmotor
10-26-2013, 04:41 PM
im in the process removing the A/C compressor on my NON vvti 1jz. do i need a special support bracket to do so? all i could find in the 2j thread was that it is needed for a 2j, any help would be mucho appreciated.

VIPDRFT
10-26-2013, 08:58 PM
Yeah, it looks like it.

http://www.driftworks.com/forum/technical/130965-1jz-belt-non-air-con.html

93egallmotor
11-01-2013, 04:23 PM
this is from the 2j thread. got no response so maybe ill get some insight here.


If you are using the JDM factory twin turbos you will need to source a jdm downpipe which used to be hard to find, but you can find them on ebay now. Just search “JZA80 front pipe, 1st pipe or decat. and it will show up. here is a picture of what you will need.
(Pic of said jdm downpipe)
http://i2.photobucket.com/albums/y47/flicktitty/JDM2JZGTEdownpipe.jpg



can anyone confirm if this works with a 1jzgte stock twins as well? the flange looks to be right

1jz s14
11-02-2013, 04:53 AM
anyone ever retain A/C with a 1jz swap ?


Yes sir I have a/c on mine

Night drifte89
11-15-2013, 06:53 AM
I've heard you can use a Audi a4 serpentine belt if you run no ac? True? If so anyone do this ? Luck?

1jz s14
11-15-2013, 07:29 AM
I've heard you can use a Audi a4 serpentine belt if you run no ac? True? If so anyone do this ? Luck?


Yes , from a 2000 a4 Audi with a 2.8

BiG MiKE86
11-15-2013, 07:31 AM
I've heard you can use a Audi a4 serpentine belt if you run no ac? True? If so anyone do this ? Luck?

From my build thread -should be the same for 1jz if Im not mistaken - Serpentine Belt info

I received my serpentine belt yesterday. I went with the Goodyear Gatorback model (part number located in pics below) and it fits quite nice for the 2JZ-GTE with NO A/C compressor installed.

http://img.tapatalk.com/d/13/11/06/5aqyhege.jpg

http://img.tapatalk.com/d/13/11/06/7yha7eja.jpg

http://img.tapatalk.com/d/13/11/06/va5ybyhy.jpg

http://img.tapatalk.com/d/13/11/06/ebapytat.jpg

Night drifte89
11-15-2013, 07:39 AM
From my build thread -should be the same for 1jz if Im not mistaken - Serpentine Belt info

What did that cost ?

BiG MiKE86
11-15-2013, 07:53 AM
What did that cost ?

eBay it was $22-23 shipped to my door

Night drifte89
11-15-2013, 07:58 AM
eBay it was $22-23 shipped to my door

Cool cool, thanks

Night drifte89
11-25-2013, 05:21 PM
Hey guys am I the only one that uses this? Lol question I am looking to get a sway bar for my s13. I have a 1jz non vvti don't know if that matters, wha brands or what style sway bar do I need? Heard of these ones in austriala but I lost the guys number

Night drifte89
11-25-2013, 05:27 PM
Oh and I have a rear sump oil pan

Southern Elegance
11-25-2013, 10:46 PM
Rear sump wont work with the s13 subframe you'll have to buy the upper and lower section from driftmotion or used. Most people either get sway bar spacers for stock or the sikky kit

CooleyXXXIII
11-27-2013, 11:19 PM
could someone help me out i apparently go a vvti out of a 110 and can't find a pinout

Night drifte89
11-30-2013, 12:05 PM
Big question, I'm looking into makeing my own sway bar spacers, my school has a milling machine and I don't have enough to buy a whole sway bar so hs anyone made some? How long do they have to be and we'll I just need some specs on them.

suspectsupra
01-26-2014, 02:35 PM
mk3 1jzgte vvti...fully functional....

http://i212.photobucket.com/albums/cc82/palicea2/IMG_0623_zpsf9da4a1b.jpg (http://s212.photobucket.com/user/palicea2/media/IMG_0623_zpsf9da4a1b.jpg.html)

pelliccio77
02-06-2014, 04:03 AM
Hey guys some r154 questions.. Which one fits the s chassis best? Shifter extension or no? What cars did they come in? Also what about the r154's in usdm mark 3 supras. Will that match up good shifter-wise with a jz bell housing of course? Thanks in advance.

suspectsupra
02-06-2014, 07:28 AM
Hey guys some r154 questions.. Which one fits the s chassis best? Shifter extension or no? What cars did they come in? Also what about the r154's in usdm mark 3 supras. Will that match up good shifter-wise with a jz bell housing of course? Thanks in advance.

chaser or soarer trans

stroked_jz
02-13-2014, 06:25 PM
this thread honestly makes my head hurt... a vvti is nothing like a vvl sr20... if you want horse power, stay away from the vvti. The 1jz vvti is a garbage ass motor for high hp. That and finding someone that can even tune a vvti is a task in itself. And as for the price to swap, Gs Motorsports in Irving texas, Known for 240sx will sell you a 2j/5speed and install with piping and wiring for 5k. So im pretty sure this swap can be done for a hell of alot cheaper if you know what you are doing. Just food for thought.

supersayianjim
02-13-2014, 06:55 PM
hey guys, anyone interested in some 2jz-gte(usdm 550's) injectors with resistor??

http://zilvia.net/f/showthread.php?t=554825

supersayianjim
02-20-2014, 10:56 AM
iam willing to let these go for cheap!!!

hockeyrules
04-04-2014, 02:07 PM
What are you guys using for motor mounts? I had some drift freaq motor mounts that are failing quickly.

Also looking for opinions on the drift motion turbo kits

Night drifte89
04-04-2014, 03:58 PM
get the get nuts ones, you dont need a sway bar spacers or need sway bar. i personally use zero lift strong and good

hockeyrules
04-12-2014, 12:08 PM
I have them, more so looking for suggestions on the actual motor mounts

Night drifte89
04-12-2014, 12:35 PM
I have them, more so looking for suggestions on the actual motor mounts

Zero lift, they are a great company and great quality

hockeyrules
04-12-2014, 02:46 PM
Zero lift, they are a great company and great quality


Thanks for the help, I have Get Nuts Lab Motor mounts. Im trying to figure out some new motor mounts(think like the Nismo, Cusco,Avid mounts) Not the brackets.............

BiG MiKE86
04-14-2014, 08:09 AM
Thanks for the help, I have Get Nuts Lab Motor mounts. Im trying to figure out some new motor mounts(think like the Nismo, Cusco,Avid mounts) Not the brackets.............

Solid aluminum :)

hockeyrules
04-23-2014, 10:52 AM
Solid aluminum :)


Thank you!

BiG MiKE86
04-23-2014, 10:59 AM
Thank you!


Check my build thread for pics/fitment stuff

datboibrad
04-23-2014, 11:23 AM
i thought this setup would have more support than it does but most of the people in my area still prefer the SR

RB180sxChris
04-23-2014, 11:30 AM
pretty dope thread....might do this swap for my kouki

izzy-
08-12-2014, 08:41 AM
Can someone else make a actual thread that explains how/ and what you need to for the 1jz swap. Maybe somebody like BigMike? This guy basically didn't help at all. He just posted a thread with pics of cars his shop did lol.

jza240sx
08-12-2014, 08:59 AM
Can someone else make a actual thread that explains how/ and what you need to for the 1jz swap. Maybe somebody like BigMike? This guy basically didn't help at all. He just posted a thread with pics of cars his shop did lol.

Theres write ups all over the place about how to put a 1j into an s chassis..

BiG MiKE86
08-12-2014, 09:38 AM
Can someone else make a actual thread that explains how/ and what you need to for the 1jz swap. Maybe somebody like BigMike? This guy basically didn't help at all. He just posted a thread with pics of cars his shop did lol.

LoL I did a 2jz swap but for the most part I think its all the same stuff to do the swap.

My Build Thread
http://zilvia.net/f/showthread.php?t=488537

Flicktitty also has an amazing build thread and is also the creator of the JZ S-Chassis Swap thread

Build thread:
http://zilvia.net/f/showthread.php?t=223490

Sticky Thread:
http://zilvia.net/f/showthread.php?t=384161

Then there is Di-Devol's 1JZ S13 build which is also amazing and probably has all the info you need
http://zilvia.net/f/showthread.php?t=438157

XxS13LifexX
11-02-2014, 08:57 PM
Installed this 1jz vvti Tomei arms 8280 turbo kit today:

http://i.imgur.com/61cktJ8.jpg

Haven't run it yet obviously because I'm still completing my build, but the turbo seems like a nice piece and the kit itself fit flawlessly. For others reference, I figured I'd share this torque spec sheet included in the instructions (note that these are in n*M):

http://i.imgur.com/hdw604o.jpg

bmaddock
02-19-2015, 10:59 AM
Didn't realize there was a 1J swap thread and was just using the 2J thread. I'm writing a tutorial to go along with my swap I suppose I will post here instead of making another thread.

Good stuff so far, I should be done by April or so at this rate...a little slow due to the cold and 9-5 life.

Mister.E
02-19-2015, 11:50 AM
We should just get the name of the other thread change to "JZ Swapped S-Chassis Thread."

This thread had potential but went downhill really quickly.

bmaddock
02-19-2015, 12:14 PM
I agree with you.

Mods, is there anyway we can lock this thread and rename the 2J thread to keep it all in one place?

corkscrew
05-31-2016, 09:27 AM
Anyone running the tomei elbow with a cxracing down pipe? Just wondering if the 3 bolt flanges will line up

drifter92
06-19-2016, 08:23 PM
I'm new to JZ engines, I got this vvti 1JZ in a trade for my entire SR20 setup and I've been working on it for a couple months now, it's almost ready to run for the first time. I'm using a CD009 transmission, stock turbo, MAF, injectors, ECU, etc. I will get my AC going ASAP and this will be a car built for Lone Star Drift down here in Texas. Checking in!

http://i.imgur.com/ncHjrTd.jpg
http://i.imgur.com/QPH9IZ7.jpg

drifter92
06-20-2016, 09:51 PM
Here is where I am tonight
http://i.imgur.com/2shA7Da.jpg?1

I made my own inlet tube and outlet to get rid of the OEM aluminum air tank
http://i.imgur.com/MQCEpUO.jpg?1

DIY traction control delete
http://i.imgur.com/QM1LrVF.jpg?1

http://i.imgur.com/ebhpjdP.jpg?1

gates barricade fuel lines
http://i.imgur.com/UbzA6br.jpg?1

dual SPAL 12" electric fans (we will see if they keep it cool)
http://i.imgur.com/VsROFEV.jpg?1
http://i.imgur.com/rxhNLKN.jpg?1

ceramic/powder coated OEM parts and a FutureFabrication turbo elbow
http://i.imgur.com/SWNpkCf.jpg?1
http://i.imgur.com/BDHwu8g.jpg?1
http://i.imgur.com/VIoRiIm.jpg?1

shaftmasters custom aluminum driveshaft
http://i.imgur.com/EVM59oR.jpg?1

350Z cd009 transmission
http://i.imgur.com/NEBdqTE.jpg?1

disassembly and new gaskets
http://i.imgur.com/fmA0p43.jpg?1
http://i.imgur.com/gdJQ6UB.jpg?1
http://i.imgur.com/oxXaIPf.jpg?1
http://i.imgur.com/29HP7Tz.jpg?1

drifter92
06-20-2016, 10:06 PM
DIY transmission crossmember
http://i.imgur.com/nIBWbDn.jpg?1

SPEC twin disc clutch, maverick motorsports cd009 adapter plate
http://i.imgur.com/ox9Yx8l.jpg?1
http://i.imgur.com/weE1Y0x.jpg?1
http://i.imgur.com/sejBu3j.jpg?1

corkscrew
06-20-2016, 10:26 PM
Awesome progress dude

bmaddock
06-21-2016, 10:23 AM
Wow that is great, quality build! I already wish I went a little more in depth like you did to clean everything. Sort of wish I went with the cd009 too.

drifter92
06-23-2016, 07:53 PM
thanks guys, I appreciate the support!

TheRealSy90
06-23-2016, 08:24 PM
You'll do better with cooling if you mounted the fans 1/4" to 1/2" away from the radiator on an aluminum shroud so that they actually pull air through the entire radiator surface, and not just through the diameter of the fans.

drifter92
06-23-2016, 08:53 PM
I'm probably going to move everything forward and run a clutch fan

edit: I cut the core support and i'm moving the radiator and AC condenser forward

http://i.imgur.com/e5DGyDg.jpg?1
http://i.imgur.com/veG19WM.jpg?1
http://i.imgur.com/RBc0w6l.jpg?1
http://i.imgur.com/wJFwwkD.jpg?1
http://i.imgur.com/VUC9tex.jpg?1
http://i.imgur.com/Bv3nZ3R.jpg?1
http://i.imgur.com/SFZergL.jpg?1
http://i.imgur.com/CZ3bm4o.jpg?1
http://i.imgur.com/z2ndkgv.jpg?1
http://i.imgur.com/f2wwiEg.jpg?1

Peterxs13
07-15-2016, 03:33 AM
http://http://s167.photobucket.com/user/driftready1/media/IMAG0251_zpse7c5dcc3.jpg.html woah never seen this before

drifter92
07-22-2016, 10:56 PM
Just got my car running today!!!!!!!!!!!

https://www.youtube.com/watch?v=xZFpY02xMh8

cole d
07-23-2016, 04:57 AM
Why did you pull the dual fans off ?

drifter92
07-25-2016, 10:00 PM
Why did you pull the dual fans off ?

I dont want to have overheating issues in the future

bluz370
08-01-2016, 03:02 PM
Dean, did you get the full SC300 fan and fan clutch? I cant tell in the pics, but is it offset to the side like all JZs?


I am going through with my swap and was curious what all was needed. Did you go SR rad?

drifter92
08-05-2016, 08:40 PM
Dean, did you get the full SC300 fan and fan clutch? I cant tell in the pics, but is it offset to the side like all JZs?


I am going through with my swap and was curious what all was needed. Did you go SR rad?

Yes its offset, you have to use a MK3 supra fan shroud on the SR20 radiator. I pulled my SR for this JZ so I already had the SR radiator. Koyo triple pass, amazing radiator btw!

corkscrew
08-06-2016, 06:37 AM
Any pics of the fan shroud on the sr radiator?

drifter92
08-07-2016, 07:35 PM
i dont have one yet, but my friend did, search his name as240 on google

Teister
10-24-2016, 11:39 AM
Hey im trying to figure out what some of these connectors are on my 1jz non vvti engine harness.. anyone know?

95976

95977

95978

95979

drifter92
05-16-2017, 09:50 AM
https://www.youtube.com/watch?v=mqAzJRkheSc

I got my car drivable today after LOTS of work, replaced head gasket, ARP head studs, decked head, valve job, Collins Adapter plate, competition stage 3 clutch, serial9 cd999 shifter relocation, stock VVTi 1JZ, stock MAF, injectors, ecu, boost, turbo, all stock