PDA

View Full Version : Rb25det power steering question


Turb0wned
08-24-2013, 10:49 PM
I bought a steel braided power steering line from rawbrokage. I realized I do not have the rb25det fitting that goes on the power steering pump, the piece that the banjo bolt goes to.

My question is, can I run the power steering line without this? Instead of putting that fitting on just bold the line straight to the pump. I'm afraid it might flow to much fluid into the rack and pinion.

fliprayzin240sx
08-24-2013, 11:26 PM
KA one might the be same...

Turb0wned
08-24-2013, 11:30 PM
KA one might the be same...

No its not. The bolt doesn't fit...

fliprayzin240sx
08-24-2013, 11:34 PM
I'm gonna have to check, I'm running my KA pump on my RB25. Opted to run the KA pump so if it would be easier to find a replacement.

Turb0wned
08-25-2013, 12:51 AM
I'm gonna have to check, I'm running my KA pump on my RB25. Opted to run the KA pump so if it would be easier to find a replacement.

I was going to do this but my s14 pump is slightly different from the s13 pump so I figured I just run the RB pump till it goes.