Silvia triple projector aiming

[vvtisupra]

I've tried searching but to no avail. Can someone tell me where the adjuster screw is ? my triple projector s13 lights are aimed to the ground. Little help for a new s 13 owner ?

[Sil-Abc]

in the back of the projectors the 10mm plastic "bolts" stick out. its like a long stud but plastic. one is adjusting the height and the other is adjusting the left and right.

ALSO BEWARE OF ADJUSTING IT TOO MUCH! last time i adjusted my light the glassed cracked and popped out. i overtightened it so try not to force it.

[vvtisupra]

alright i used the adjuster bolts which were 8mm but for the low beam all i can get is for it to go up enough to be fog lights and it won't go any higher. Does anyone know what could be wrong? As of now i am using my high beams aimed down to driving light level

[vvtisupra]

:rawk: anyone ?

[Sil-Abc]

uhhh ur headlights could be installed wrong... such as its tilted downwards.. tilt it up i suppose.

[kingsol]

umm... you have headlight brackets right?

[vvtisupra]

hrmm i was looking at it and they look fabricated. that and the rear is higher than the front but the headlights are aimed so low that it clips the front of the bumper.

[kingsol]

well then that's your problem, stop messing with the screws and buy silvia headlight brackets on ebay or something... i think you can get them for about $50. do the headlights bolt up fie to the bracket on the fender?