Isis t28 install question?

[Little Jason]

okay so i just got my isis t28 in, along with the isis bottom mount turbo lines, the turbo came with a paper that says not to remove the oil feed banjo bolt and fitting from the turbo, but i think i should remove it to put the oil feed line in?

and yes I have looked it up, and can't find a clear answer on this, so I'm asking for opinions/experiences with this same problem.

http://i43.tinypic.com/2iazaza.jpg

[zombiewolf513]

Call isis. Theyll give you the best answer. Make sure to right it all down in case you need to sue them

[Little Jason]

Disregard my retarded self, figured it out. (i think) I was just supposed to take the fitting off the isis turbo lines and use the fitting that came with the turbo.

http://i40.tinypic.com/2j32wiw.jpg

[ultimateirving]

The reason for the banjo is it has the correct size restrictor for that turbo. You can use the other -an fitting you had pictured, if its the correct size restrictor

[Little Jason]

The reason for the banjo is it has the correct size restrictor for that turbo. You can use the other -an fitting you had pictured, if its the correct size restrictor
Thanks buddy, got a little confused when there was a banjo bolt on the turbo, and the lines clearly had a an fitting for the oil feed, lol.

[zombiewolf513]

Im glad you got!