PDA

View Full Version : Blow thru MAF and recirc?


greenb0y
07-17-2013, 12:36 PM
Im having problems with my ka24det stalling due to atmosphere BOV and the MAF being on the turbo inlet.

If i set up a blow thru z32 after the intercooler, would recirculating the BOV be ok?
Ive read that recirculating keeps your turbo spooling between shifters because the air released by the BOV is going into the inlet then directly on the turbo.

Would this mess up the set up at all? The same air would be making its way through the MAF then into the engine
I DONT KNOW, just throwing ideas out there

heychris
07-17-2013, 01:10 PM
Subscribed as I am planning a blow through setup... Before someone else suggests; you might try KA-T.org and report back on your findings to make your thread complete...

Cheers,
Ch

Sent using XT912 M