PDA

View Full Version : T28 oil return line

jtt220
05-05-2004, 03:12 PM
I replaced by t25 with a t28 from a s14 (dual BB). The flange for the oil return line is different. Does anyone know were to buy a flange and SS line for my new turbo? The flange bolts are 1.5" (38mm) apart. I have seen 44mm and 50mm flanges for sale with pipe thread so a fitting and hose could be used, but have had no luck finding a 38mm. Thanks in advance!
ƒVƒ‹ƒGƒCƒeƒB
05-05-2004, 03:20 PM
http://www.store.yahoo.com/phase2motorsports/
Phase 2
AadosX
05-06-2004, 12:06 PM
I just put a GT28R into my car, and I just dremmeled the holes on that peice that bolts to the turbo so that I could make it fit. I also took a gasket and cut a bigger hole in it so that it would work.
AadosX
05-06-2004, 01:39 PM
http://www.store.yahoo.com/phase2motorsports/
Phase 2

He said OIL RETURN, they only have steel braided line kits for coolant in, coolant return, and oil in...
andrave
05-06-2004, 03:30 PM
and they are fucking expensive
Demik
05-06-2004, 03:45 PM
I just put a GT28R into my car, and I just dremmeled the holes on that peice that bolts to the turbo so that I could make it fit. I also took a gasket and cut a bigger hole in it so that it would work.


i did the same but used a round file and the black gasket stuff...