rb26 idle issue

[str33tpr3p]

k so i just replaced the gaskets on my intake manifold i had everything apart turned car back on it idles at 2000rpm and i cleaned the throttle bodies cause i thought it was carbon build up but turns out its a special wax that makes sure they dont leak air. Only thing ive heard of to reseal them is a tomei butter fly wax which by the looks of it is discontinued so i was wondering if anyone else knew of other products like it so i can get my car back on the road.

any ideas would help thx!

[S12 Drifter]

you should try GTR canada if no one here is able to help you.

[str33tpr3p]

you should try GTR canada if no one here is able to help you.

yeah i will im a silvia owner but did this for my friend.. i hate rbs lol

[S12 Drifter]

So, you pulled the intake manifold off to do what exactly? what was it doing before the 2,000 RPM idle?

[str33tpr3p]

had a coolant leak so replaced all the lines , than gaskets for intake manifold but i cleaned the throttle bodies cause i thought it was carbon deposit build up in them but turns out to be a wax. Car was idling at 950rpm before now at 2000rpm still sounds fine just high rpm i looked into it i know thats the problem just need something else to seal it since the tomei wax is discontinued .

[S12 Drifter]

Rb26 Throttle Bodies - Forced Induction Performance - Skylines Australia (http://www.skylinesaustralia.com/forums/topic/267267-rb26-throttle-bodies/)

here you go dont know if it helps

[str33tpr3p]

I ended up using dry moly film lube i heard it worked so far so good but it back together idles back down at around 1000 rpm. so for anyone that does this in the future this stuff works :)

[S12 Drifter]

I ended up using dry moly film lube i heard it worked so far so good but it back together idles back down at around 1000 rpm. so for anyone that does this in the future this stuff works :)

Thats awesome to hear!