boske
04-07-2013, 11:35 AM
I would much rather sell this as a complete setup, but I will part out if needed. This setup was built for a ka24de in an s13. For sale is a Holset hx35, nicely top mounted with the JGS manifold. This turbo and manifold are both known for being very reliable. If you want to run a top mount setup without the worry of cracking a cheap manifold this is the way to go. This also mounts the turbo forward and away from the brake master cylinder, making this combination ideal. To finish it off a 3" custom downpipe, with flex pipe was made, and it was built to clear the AC line and steering. I would still recommend a heat wrap on the AC line (parker fire shield). This was all mocked up using an APEXI downpipe so fitment should be great with most SR type exhausts. The intercooler package started as a typical ebay kit, but was modified for use with this turbo and manifold. Two 45 degrees silicone couplers were used to fit everything nicely after making a few cuts to the included piping. Also included is an intake pipe, and all the needed couplers for running the included z32 MAF and filter. A stainless steel drain line is included, as well as an oil filter adapter for installing an oil pressure line. I would like to sell all of this for $950 plus shipping. I will also include a new felpro headgasket for the ka24de.
http://zilvia.net/f/attachments/sale-items/45711d1351651490-ka24de-turbo-setup-holset-hx35-jgs-manifold-nismo-740cc-tial-38mm-lc-1-wideband-ka3.jpghttp://zilvia.net/f/attachments/sale-items/45709d1351651460-ka24de-turbo-setup-holset-hx35-jgs-manifold-nismo-740cc-tial-38mm-lc-1-wideband-ka1.jpg
http://zilvia.net/f/attachments/sale-items/45711d1351651490-ka24de-turbo-setup-holset-hx35-jgs-manifold-nismo-740cc-tial-38mm-lc-1-wideband-ka3.jpghttp://zilvia.net/f/attachments/sale-items/45709d1351651460-ka24de-turbo-setup-holset-hx35-jgs-manifold-nismo-740cc-tial-38mm-lc-1-wideband-ka1.jpg