PDA

View Full Version : Rb25 s2 tps signal voltage reading low?


Huntsman2007
01-08-2013, 04:11 PM
I've been trying to figure out what's going on with my tps for the last few hours. I'm trying to set it at the .45 closed throttle and 4-4.5 wot, but at closed throttle the highest reading I can get is .2 volts from the signal wire. I tried swapping out the tps for a spare but the same results. Any ideas?

bkt808
01-09-2013, 02:23 AM
you have it plugged in to the right plug on the tps? i had this problem and stumped me for about a month.

Huntsman2007
01-09-2013, 06:06 AM
Yeah, brown connector to the top plug