PDA

View Full Version : thread pattern for lug nuts?

XXX4life
03-18-2004, 11:10 AM
what is the thread pitch for the lug nuts on my 90 240sx? i tried to put some lug nuts from my toyota onto the 240sx and they didn't wanna screw on?
thanks
epoxy_nc
03-18-2004, 11:32 AM
what is the thread pitch for the lug nuts on my 90 240sx? i tried to put some lug nuts from my toyota onto the 240sx and they didn't wanna screw on?
thanks

i dont know it right off the top of my head... but if you search i'm sure it wont take but a minute!!!!
RBS14
03-18-2004, 11:37 AM
12 X 1.25 Same with most nissans i know of.
drift into a curb
03-18-2004, 12:31 PM
And same as Subarus.

Toyotas are 12x1.5 like Hondas, Mitsu, etc etc.
Ghettokracker71
03-22-2004, 03:29 PM
12 X 1.25 Same with most nissans i know of.
is that the same on a 1991 ??? I just changed the wheels,but my lugs are to fat and any socket that I try to use to tighten/losen them gets stuck in the little hole...hah hah,I'm looking for a long shaft one,or super small (diameter of the head only) ones....anybody know where I can find them???
mistaanime
03-22-2004, 04:36 PM
is that the same on a 1991 ???
yes they are the same..so are the 95-98.....
RBS14
03-22-2004, 06:32 PM
All nissans are the same thread pitch, except maybe for the new truck and maybe the suv's....

GhettoKracker: are you saying the socket gets stuck in the hole in the wheel? If so, you need a thinwall socket.
Ghettokracker71
03-22-2004, 08:41 PM
All nissans are the same thread pitch, except maybe for the new truck and maybe the suv's....

GhettoKracker: are you saying the socket gets stuck in the hole in the wheel? If so, you need a thinwall socket.
thats just it,I bought the thinnest one I could find.....maybe I need to keep looking....:doh:....:(
drift into a curb
03-22-2004, 09:29 PM
Get some Tuner lug nuts like Muteki, McGard, or Gorilla. As long as your wheels are aftermarket, the lug nuts will work, unless they require a special type of shank lug nut, ie. some Kosei wheels.
Ghettokracker71
03-23-2004, 10:17 AM
Get some Tuner lug nuts like Muteki, McGard, or Gorilla. As long as your wheels are aftermarket, the lug nuts will work, unless they require a special type of shank lug nut, ie. some Kosei wheels.
I've seen them,but I didn't know if there had a smaller head on them or not...thanks,I'll look into them
RBS14
03-23-2004, 11:18 AM
^^^
just get them in the right thread pitch, i have em, they rock.