MunsonAuto
10-18-2012, 08:49 PM
It’s looking like its time to sell our ’93 S13 ‘Vert in order to fund other projects. I bought this car around this same time last year and have since built it to be a backup to our competition car along with a bit of an experiment.
Looking to sell as an almost competition ready roller, all you’ll have to add is your drivetrain and seats and it’ll be XDC/DMCC/whatever you want to run legal.
-Chassis is 100% rust free, I refuse to buy a S-chassis unless it’s spotless; no accidents that I’m aware of. Quarters have been repainted for some reason, never looked into why, probably just door dings/dents fixed.
-Quarters have been rolled/pulled to clear 17x10.5 +20mm with a 275/40/17 Falken 615K
-Kales Custom “6pt” DMCC legal cage, low X style door bars (easier getting in and out if you street this thing)
-All convertible motor/top stuff has been removed aka no top
-Doors are gutted, factory safety brace and window regulator mounts are still there
-Heater core removed
-Chassis harness trimmed (lights, turn signals, wipers all still work like factory)
-S14 Seats
-G-Force latch & link 4pt harnesses
-Stock S13 dash and gauge cluster
-Stance XR/Pro Comp coilovers (will come on 8k & 6k rates)
-Stock front and rear sway bars
-Stance tension rods
-Stance traction rods
-Stance ruca’s
-Stance toe arms
-Welded diff (stock 4.08 ratio)
-Modified/braced front LCA’s
-Dang Drifters knuckles (stock S13 inner and outer tie rods)
-Dang Drifters front bash bar
-Front subframe is modified for LSx/GTO oil pan
-Walbro 255lph fuel pump
-Upgraded 3/8” fuel line (pump/tank still has return line, Corvette FPR mounted just in front of tank, one 3/8” feed line up to the engine bay, 60psi at the rail)
-Isis Axle back
-Circuit Sport front strut tower bar
-NRG slim hub
-NRG 2.5 Quick release
-NRG leather wheel
-Super clean battery relocation
-Interior and trunk painted “East Coast Grey”
-Engine bay painted Rustoleum Blue/Purple color shift (can easily repaint once drivetrain is out if buyer prefers)
I would prefer to sell this car as a ready to go roller, but would also be willing to source/build/install another LSx drivetrain at buyers expense if they wanted a completely built turn-key car.
Looking for $4500 on Cobra reps (17x9 +20mm on 235/40/17 front, 17x10.5 +20mm on 275/40/17 rear) or $4000 on generic wheels and tires. Not interested in trades, cash only. Feel free to make offers. Car is in Vermont just outside Burlington, but I am completely willing to arrange meeting/helping out with transport if absolutely necessary.
PM or 802-nine two two-2186
UIIFUUkAmFA&
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/581240_359311067472049_357865801_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/391296_359311087472047_1152421528_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/532184_375491559187333_1507568905_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/306842_359525780783911_1811998489_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/551023_359311117472044_2026852559_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/563880_359311097472046_1990174166_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/558119_359311004138722_1449577953_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/625579_359310947472061_495700428_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/552606_359310924138730_293884948_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/530078_359310910805398_496625991_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/561281_359310884138734_1722405638_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/548989_359310874138735_778177351_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/302445_359310857472070_1050807518_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/380203_326605070742649_1328229278_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/533368_325954380807718_1921264492_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/552503_385706684832487_1705636396_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/319051_385706871499135_353421869_n.jpg
Looking to sell as an almost competition ready roller, all you’ll have to add is your drivetrain and seats and it’ll be XDC/DMCC/whatever you want to run legal.
-Chassis is 100% rust free, I refuse to buy a S-chassis unless it’s spotless; no accidents that I’m aware of. Quarters have been repainted for some reason, never looked into why, probably just door dings/dents fixed.
-Quarters have been rolled/pulled to clear 17x10.5 +20mm with a 275/40/17 Falken 615K
-Kales Custom “6pt” DMCC legal cage, low X style door bars (easier getting in and out if you street this thing)
-All convertible motor/top stuff has been removed aka no top
-Doors are gutted, factory safety brace and window regulator mounts are still there
-Heater core removed
-Chassis harness trimmed (lights, turn signals, wipers all still work like factory)
-S14 Seats
-G-Force latch & link 4pt harnesses
-Stock S13 dash and gauge cluster
-Stance XR/Pro Comp coilovers (will come on 8k & 6k rates)
-Stock front and rear sway bars
-Stance tension rods
-Stance traction rods
-Stance ruca’s
-Stance toe arms
-Welded diff (stock 4.08 ratio)
-Modified/braced front LCA’s
-Dang Drifters knuckles (stock S13 inner and outer tie rods)
-Dang Drifters front bash bar
-Front subframe is modified for LSx/GTO oil pan
-Walbro 255lph fuel pump
-Upgraded 3/8” fuel line (pump/tank still has return line, Corvette FPR mounted just in front of tank, one 3/8” feed line up to the engine bay, 60psi at the rail)
-Isis Axle back
-Circuit Sport front strut tower bar
-NRG slim hub
-NRG 2.5 Quick release
-NRG leather wheel
-Super clean battery relocation
-Interior and trunk painted “East Coast Grey”
-Engine bay painted Rustoleum Blue/Purple color shift (can easily repaint once drivetrain is out if buyer prefers)
I would prefer to sell this car as a ready to go roller, but would also be willing to source/build/install another LSx drivetrain at buyers expense if they wanted a completely built turn-key car.
Looking for $4500 on Cobra reps (17x9 +20mm on 235/40/17 front, 17x10.5 +20mm on 275/40/17 rear) or $4000 on generic wheels and tires. Not interested in trades, cash only. Feel free to make offers. Car is in Vermont just outside Burlington, but I am completely willing to arrange meeting/helping out with transport if absolutely necessary.
PM or 802-nine two two-2186
UIIFUUkAmFA&
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/581240_359311067472049_357865801_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/391296_359311087472047_1152421528_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/532184_375491559187333_1507568905_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/306842_359525780783911_1811998489_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/551023_359311117472044_2026852559_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/563880_359311097472046_1990174166_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/558119_359311004138722_1449577953_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/625579_359310947472061_495700428_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/552606_359310924138730_293884948_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/530078_359310910805398_496625991_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/561281_359310884138734_1722405638_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/548989_359310874138735_778177351_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/302445_359310857472070_1050807518_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash4/380203_326605070742649_1328229278_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/533368_325954380807718_1921264492_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/552503_385706684832487_1705636396_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-snc7/319051_385706871499135_353421869_n.jpg