s14 sr trans vs s13 sr trans

[highlifein909]

i have a problem, to make long story short

my s14 has an s13 redtop engine and tranny, tranny is done so i swaped a s14 sr trans into it but its about a cm longer ??? or are they both the
exact same size?? please let me know. i tried searching it thru forums and didnt find anything, please give me some info thanks

im asking because everything is installed and the driveshaft wont connect. tranny is longer by about 1cm.

[Taylor008]

Remove the dust shield.

[highlifein909]

Remove the dust shield.

So both are identical?? Or somethings change like I said it has an s13 engine and trans but I replaced trans with a s14 sr trans

[highlifein909]

anyone has any idea???

[fliprayzin240sx]

Dust shield, knock it off since you dont need it. They're the same damn transmissions.

[Mrpopo]

I have an s14 sr trans on my redtop. I just swapped the speed sensors over and the reverse switch/sensor. It's worked perfect for over 5000 miles now.

[merks]

Like stated just knock the dust shield off. I replaced my trans in my s14 with a s13 and forgot to knock the dust shield off. Caused my drive shaft to grind on the shield. Like an idiot I bought a one piece to fix it but I do love my one piece now

[highlifein909]

Like stated just knock the dust shield off. I replaced my trans in my s14 with a s13 and forgot to knock the dust shield off. Caused my drive shaft to grind on the shield. Like an idiot I bought a one piece to fix it but I do love my one piece now

all done, grinded it off now everything is done, jus that i had a question s14 and s13 share the same speed sensors ?

[Rafa-Z]

they are different I believe just switch them over. I think the sensor is different because of the dash

[fliprayzin240sx]

all done, grinded it off now everything is done, jus that i had a question s14 and s13 share the same speed sensors ?

No, you have to use the chassis specific sensor. If you have an S14 chassis, you need the S14 speed sensor and vice versa. The cluster is caliberated for the specific sensor. S13 has pigtails while the S14 sensors just have a plug on the body.

[Boost_Fiend]

I just put an s14 sr trans on my s13 sr. Its exactly the same. All you need to do is remove the dust shield and swap speed sensors.

[highlifein909]

No, you have to use the chassis specific sensor. If you have an S14 chassis, you need the S14 speed sensor and vice versa. The cluster is caliberated for the specific sensor. S13 has pigtails while the S14 sensors just have a plug on the body.

yea i noticed but the one without the pigtails is a bit longer than the regular one. it sticks out about a cm,.. i was thinking of cutting the plugs from a s13 harness and connect the s13 speed sensor ..

[highlifein909]

I just put an s14 sr trans on my s13 sr. Its exactly the same. All you need to do is remove the dust shield and swap speed sensors.

thanks alot bro, ut my speed sensor isnt fitting right.. thats the problem from the begining, the stock s14 sensor is a bit longer, and it had a oil leak from there, therefore my tranny went low on gear oil and a gear grinded of,. but anywho, ima get another speed sensor so my cluster works fine