PDA

View Full Version : '89 s13 coupe - Help, electrical help


Foolish_Foley
09-01-2012, 01:41 AM
OK so i swapped my single cam from my hatch to my new '89 coupe shell that originally came with a single in i I hook everything up right, go to check for power and all i hhave is tail lights, headlights, interior lights, the annoying chime and hazards

I'm not getting anything else,

I checked the fuse panel, I have power to the whole right side of the box but not anything that is on tthe left, so all the ACC stuff ..

I used a light voltage tester and i have nno power to the ignition

Fuel pump isnt even kicking on

Changed the TCU out from the one iin the hatch and switched ignitions

Still nothing

Anybody have any ideas??

Eramo323
09-02-2012, 03:27 PM
you check all of your connections? make sure everything is plugged in... is the harness running along the drivers side fender rubbed on ?

booey13
09-02-2012, 03:31 PM
Did you swap harnesses as well?

blessedhellrider
09-02-2012, 03:54 PM
i had a problem with my 89 . dont remember what relay but i had to ground one . the bad thing ,it (realay)would stay on .so i added an adtional realy to trigger the ground.