A/C question SR20DET Wiring

[ArcherV20]

I figured I would post here considering the other sub-sections don't appear to get any love :(.

I'm on the final stages of getting the a/c working on my damn car, it's too damn hot with black leather in a black car T_T.

So I've done as much research as I could find on the electrical step to be done to get the a/c compressor to fire up. But I want to make sure I'm looking in the right spot before I make any cuts / splices.

I know I'm looking for black/yellow to be spliced into black/pink -- is this the right connector?

http://i.imgur.com/5ev1N.jpg


Just want to make sure I'm doing it right! Sorry for the super noob question :D.

[Prok0]

It would help to post the year of the chassis as well as the type of motorset you are working with to give a bit more specifics.

[ArcherV20]

Oh - good lord sorry I left that out :(

It's a 1995 240SX, with an S14 SR20DET in it. I have custom fabbed A/C lines installed and the SR compressor bolted onto the thing, I have the new receiver dryer also installed as well as all the little connectors hooked up in the engine bay. Wiring and Charging is my last step or so I hear, so I'm just curious which wires I should be tinkering with :D

[Om1kron]

f3 plug.

the pictured is the incorrect plug, it's the one that sits behind the ecu that has the white lever holding it in. The wires you need to tie together are in there.

Simone : My 1996 240sx: Wiring an S13 SR20DET up for an S14 (95-98) (http://om1kron.blogspot.com/2008/12/converting-s13-sr20-redtop-harness-to.html)