Pls : i need specs on T25 oil lines / coolent lines

[ass15]

FIRST OFF did my homework, for those of us who like to flame on people w/ q's.

on to my q's

1. need to know the spec on T25 oil lines and water lines, will be using it on KA not SR....... i know where they go and what not but i don't have one and i don't want to spend 150 at : phase2.... if i were to run the line around the engine what length and most importantly size of the fitting on T25

on FA they say Oil feed in the turbo is a 7/16" -24 inverted flare what about the KA block?

http://forums.freshalloy.com/ubbthreads/showflat.php?Cat=&Board=UBB9&Number=67676916&Forum=All_Forums&Words=t25%20oil%20&Match=Entire%20Phrase&Searchpage=0&Limit=50&Old=allposts&Main=67676743&Search=true#Post67676916

[AceInHole]

oil pressure sender: 1/8 BSPT
oil feed on turbo: 7/16" -24 inverted flare (brake fitting)
line should be -3AN and should not require the use of a restrictor as it SHOULD act as the restrictor itself. My line is maybe 5 - 6 ft?? I lost track cause I had a few lines lying around and put em together. Just run a string from the oil sender to where you want it to go and measure.

Coolent lines: i forgot, but I swore one of my NPT fittings worked in it. Since my car will be on the lift on thursday I might try getting it ready to run the coolent lines to it (might as well make sure I take good care of the turbo, i guess).