S14_drift junkE
06-17-2012, 12:21 PM
Selling my 1993 Jeep Wrangler. Had a change in priorities. I know it's a long shot on zilvia but it's worth a shot if someone wants something different.
Gen 1 350 SBC with approx 4500 miles (4bolt main)
Th400 transmission
Radiator Expressed 4 core radiator. With E-fan
Novak Motor Mounts
Edelbrock performer manifold (brand new)
Holley 670 truck avenger carb (brand new)
Advanced Adapters Headers (brand new, just painted white)
PSC full hydro single ended.
(brand new not installed. Will be installed behind the axle with WFO arms)
Winters Shifter (brand new, not installed)
113" wheel base
Chevy 60 front all 35 spline, Cyro treated, Warn Premium Hubs, 4.56, welded.
14 Bolt, Detroit, 4.56, disk brakes
Dana 300/Terra Low 4-1/Advanced Adapter HD rear output, twin sticks
Advance Adapters kit for th400
16"X2.5" King Coilovers w/res. on all 4 corners
4 link rear, 1-1/2 heims lowers, 7/8 heims uppers
3 link front, 1-1/2 heims
42x15" Iroks/15x10 steel wheels (one tire had a rip in the sidewall but is patched and tested to hold air under any situation)
Half of the frame has been tubed
Custom Flame paint done by Bear inc
Inside of jeep has been rhino lined
Boatsides and some fender trimming.
1-3/4 DOM cage
12Volt guy dual battery
12Volt guy switch panel
12 volt VIAR air compressor (100% duty cycle)
-Might be some stuff im missing, but ill keep updating
This is the best pic i have of it. Its when i first picked it up, the rest are of the jeep in the garage.
https://sphotos.xx.fbcdn.net/hphotos-snc7/409284_3144574619142_691635142_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/581310_452009081479546_590471963_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/423314_410353695645085_165182518_n.jpg
https://sphotos.xx.fbcdn.net/hphotos-snc7/421036_410353288978459_1789055610_n.jpg
https://sphotos.xx.fbcdn.net/hphotos-ash4/430656_407387822608339_310321352_n.jpg
https://sphotos.xx.fbcdn.net/hphotos-ash4/314162_452641561416298_1859317774_n.jpg
-If anyone wants more detailed pics LMK-
**As you can see it is still a project but it is 90% done, maybe even 95%. This is what it needs to be done:
-Tranny cooler lines
-Wire up the motor (3 wires)
-Buy the rest of the pullys for the LWP since i converted from SWP
-Install Shifter
-Install hydro steering
* I have damn near every part needed to complete this jeep. Just i have lost intrest at this time, and if i can get what i want out of it, ill be fine with letting it go. I spent a shit load on this jeep so far, and i would love it see it go to someone who will use it for what its built for.*
I am looking to get 10000 OBO or trade for a LOW milage sportbike CBR, GSXR, ETC PLUS CASH. I am located at Vandenberg AFB, CA. I really want a bike so send me some offers
Gen 1 350 SBC with approx 4500 miles (4bolt main)
Th400 transmission
Radiator Expressed 4 core radiator. With E-fan
Novak Motor Mounts
Edelbrock performer manifold (brand new)
Holley 670 truck avenger carb (brand new)
Advanced Adapters Headers (brand new, just painted white)
PSC full hydro single ended.
(brand new not installed. Will be installed behind the axle with WFO arms)
Winters Shifter (brand new, not installed)
113" wheel base
Chevy 60 front all 35 spline, Cyro treated, Warn Premium Hubs, 4.56, welded.
14 Bolt, Detroit, 4.56, disk brakes
Dana 300/Terra Low 4-1/Advanced Adapter HD rear output, twin sticks
Advance Adapters kit for th400
16"X2.5" King Coilovers w/res. on all 4 corners
4 link rear, 1-1/2 heims lowers, 7/8 heims uppers
3 link front, 1-1/2 heims
42x15" Iroks/15x10 steel wheels (one tire had a rip in the sidewall but is patched and tested to hold air under any situation)
Half of the frame has been tubed
Custom Flame paint done by Bear inc
Inside of jeep has been rhino lined
Boatsides and some fender trimming.
1-3/4 DOM cage
12Volt guy dual battery
12Volt guy switch panel
12 volt VIAR air compressor (100% duty cycle)
-Might be some stuff im missing, but ill keep updating
This is the best pic i have of it. Its when i first picked it up, the rest are of the jeep in the garage.
https://sphotos.xx.fbcdn.net/hphotos-snc7/409284_3144574619142_691635142_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/581310_452009081479546_590471963_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/423314_410353695645085_165182518_n.jpg
https://sphotos.xx.fbcdn.net/hphotos-snc7/421036_410353288978459_1789055610_n.jpg
https://sphotos.xx.fbcdn.net/hphotos-ash4/430656_407387822608339_310321352_n.jpg
https://sphotos.xx.fbcdn.net/hphotos-ash4/314162_452641561416298_1859317774_n.jpg
-If anyone wants more detailed pics LMK-
**As you can see it is still a project but it is 90% done, maybe even 95%. This is what it needs to be done:
-Tranny cooler lines
-Wire up the motor (3 wires)
-Buy the rest of the pullys for the LWP since i converted from SWP
-Install Shifter
-Install hydro steering
* I have damn near every part needed to complete this jeep. Just i have lost intrest at this time, and if i can get what i want out of it, ill be fine with letting it go. I spent a shit load on this jeep so far, and i would love it see it go to someone who will use it for what its built for.*
I am looking to get 10000 OBO or trade for a LOW milage sportbike CBR, GSXR, ETC PLUS CASH. I am located at Vandenberg AFB, CA. I really want a bike so send me some offers