PDA

View Full Version : WTB: s14 kouki ka24 engine harness or just windshield wiper and F3 plugs


D.Jones
06-12-2012, 11:48 AM
Please delete, found what I needed. Thanks.

silver350z05rb
06-12-2012, 12:09 PM
FYI.....in case you dont find one,find any similar kouki plug for the wind. amp,and rewire it,its acually easy,i did it to mine,i.was missing the kouki wind. amp and found a random plug that fit,i just rewired it to work,took less than 10mns...good luck

LuckyRPS13
06-12-2012, 05:03 PM
I could get you a zenki wiper motor and harness if you are interested.

D.Jones
06-12-2012, 07:41 PM
Thanks for the info silver350z

RPS13: I need one from a kouki, I have a 97 s14 and the wiper plug is different from a kouki model to a zenki. I have had both a 95 zenki and 97 kouki so I know from experience lol. Thanks though.

LuckyRPS13
06-14-2012, 01:17 AM
I was thinking If you had the older wiper motor you could wire it in with the matching older plug. It would be a retro fit of the motor to use a plug that would be way easier to get a hold of. I could pull both the motor and the plug from a local yard for you

silver350z05rb
06-14-2012, 01:16 PM
At the moment im running a R33 AMP on mine I just rewired it using the skyline plug, before this,i was using a random plug I found and was using a s14 kouki amp,so basically you could also use a zenki plug,but you need the zenki amp, same for skyline amp,you need a skyline plug etc etc

Free bump!

D.Jones
06-14-2012, 05:38 PM
Thanks everyone. I actually found the plugs that I needed and just waiting on shipping.