PDA

View Full Version : sideskirts


oojpeeoo
02-13-2004, 02:12 AM
will the s14 JDM sideskirts fit on a 96 usdm side? ... cuz i got the front end conversion and im jw if i would have to get the zenki sideskirts..? ? ? ? ?

oojpeeoo
02-13-2004, 02:13 AM
the JDM s14 KOUKI sideskirts that is ... ^^

DRFT
02-13-2004, 02:21 AM
yup it will fit, 99% i think

the240sxer95
02-13-2004, 02:27 AM
jdm kouki side? what do those look like..

DRFT
02-13-2004, 02:35 AM
same as USDM except for navan sides cause those didnt come out here

revat619
02-13-2004, 02:35 AM
The s14 "jdm" kouki side skirts are exactly the same as the usdm s14 kouki side skirts. It's the same part.

And to answer your question, oojpeeoo, yes the sideskirts will fit.

EDIT: Crap, DRFT, you barely beat me! haha

the240sxer95
02-13-2004, 04:09 AM
oww! haha the navan pieces =] ineed me some of those, hard to find =[

oojpeeoo
02-13-2004, 04:25 AM
hmm u sure... cuzz i thought the JDM kouki sides were the one on jspec.com ... under the kouki conversion its got a silver s14 with different sideskirts on them... wut kinda sides are those then.. im pretty sure those are the JDM kouki ...=\

revat619
02-13-2004, 04:28 AM
http://store3.yimg.com/I/jspec_1780_7800345

You're talking about these right?

Those arent kouki sides. Those are the jdm zenki aero sides.

niss
02-13-2004, 10:40 AM
how come in that pic the side skirt looks to be blocking the door?

wylin
02-13-2004, 10:41 AM
Those aero type side skirts in japan are availible as a dealer option along with the 3-piece navan wing on both zenki and kouki. Personally i think they look kind of ugly on kouki as does the navan wing. The reason they look like they are blocking the door is that they fallow the doors line closely.
Observe:
http://i.xanga.com/wylin/LFT_high_10_03lowres.jpg
http://i.xanga.com/wylin/Harshngle_10_03lowres.jpg
http://i.xanga.com/wylin/REARSHOT_low.jpg

The side skirts fit on both models, but if you do not have the stock mounting hardware you will either have to use large amounts of double sided tape or drill into the rocker to attempt to duplicate the stock mounting points (possiblely creating a rust issue), also on the ends they dont line up unless there are factory clips and you need to drill 2 new holes per side to so u can secure the skirts.