PDA

View Full Version : Apexi PFC boost controller or Blitz SBC??????


gotta240
06-04-2012, 11:47 PM
I have a Apexi Power FC computer. Wondering which would be better for boost controll....... The add on Apexi PFC boost controller or the the Blitz SBC boost controller?

Thanks guys.

canyontougeFC3S
06-04-2012, 11:50 PM
+1 Apexi PFC Boost Controller

Mr.GT30
06-05-2012, 02:21 AM
+1 +2 + 3 for PFC boost control

gotta240
06-05-2012, 09:46 AM
What makes the PFC boost controller a better setup when added to the ecu than the blitz SBC? The one DOWNSIDE I see is that I wont have easy access to switch between boost levels easily from the sbc display screen if using the Apexi.

slider2828
06-05-2012, 10:00 AM
HKS EVC6... The best most advanced boost controller out there... Blitz you gotta get the dual SBC (Type-R).... Pressure control is a bit better... single not so much, but of course depends on your setup....

gotta240
06-06-2012, 01:36 AM
Only two options here....... The blitz sbc which I already have, or ditch it and get the Apexi unit to add to my PFC.

Which and why?

Thanks

s13silvia123
06-06-2012, 11:00 AM
the PFC boost controller unit unlocks the features in the PFC. As for the Blitz SBC ask people who has it because i am not familiar with it. I have the PFC boost controller but i haven't install it yet but i will soon add into the PFC.

EvoVIII808
06-06-2012, 11:31 AM
The HKS and PFC use the same solenoid.

Since you already have the blitz just install it, but as stated earlier with the PFC you will have full function of the ecu.

EsChassisLove
06-06-2012, 12:41 PM
AVCR. :) hahahaha

slider2828
06-06-2012, 02:51 PM
The HKS and PFC use the same solenoid.

Since you already have the blitz just install it, but as stated earlier with the PFC you will have full function of the ecu.

Are you kidding me? Not the new EVC 6.... PowerFC technology is so old. There have been no revision's since the release.

There is nothing to unlock, its really just boost pressure.... STo62ZpjG1I

s13silvia123
06-06-2012, 03:04 PM
Are you kidding me? Not the new EVC 6.... PowerFC technology is so old. There have been no revision's since the release.

There is nothing to unlock, its really just boost pressure.... STo62ZpjG1I

what he said ^^^

towlie
06-07-2012, 04:06 PM
TurboSmart Boost Street is what I am considering

Turbosmart TS-0302-1002 e-Boost 40 PSI Street Boost Controller (http://www.google.com/products/catalog?hl=en&pq=turbosmart+boost+controller&cp=11&gs_id=4&xhr=t&q=turbosmart+boost+controller&um=1&bav=on.2,or.r_gc.r_pw.r_qf.,cf.osb&biw=1440&bih=805&wrapid=tlif133910671573610&ie=UTF-8&tbm=shop&cid=8922299312303753832&sa=X&ei=rSXRT-PNDoac2AXa7PG5Dw&ved=0CGkQ8wIwAQ)

slider2828
06-07-2012, 07:21 PM
Turbosmart seems nice.... aussie company I think

towlie
06-07-2012, 11:10 PM
^good eye might! Haha yup, Australian. Pretty cheap to, sub $300

slider2828
06-08-2012, 02:22 PM
Yeah I know a lot of the aussie's use there ECU's too.... but yeah should be nice..