RB25 coil pack upgrade

[2.5T_/<ouki]

I've searched around and could only find info on doing the LS coil pack swap to series 2 RBs, however I have a series 1. As you guys know the series 1 needs the ignitor.

Does anyone have any info as to whether or not the series 1 can be upgraded ?

I'm not really down for the DSR or Splitfires.

Thanks.

[Darius]

The LS2 coils have ignitors built into them so you can ditch the ignitor chip and wire the signal wires directly to the LS coils. There is a huge writeup thread on nico rb forum on how to wire these up. Search "whatsadsm". There is also a megasquirt writeup on how to do it too.

[b00stinbmx]

def go with the ls coils, they made such a night and day difference in my rb

[2.5T_/<ouki]

The LS2 coils have ignitors built into them so you can ditch the ignitor chip and wire the signal wires directly to the LS coils. There is a huge writeup thread on nico rb forum on how to wire these up. Search "whatsadsm". There is also a megasquirt writeup on how to do it too.


thanks! Found the writeups.


@b00stinbmx
Do you have s1

[2.5T_/<ouki]

Last question !

Can this be done on a stock ECU considering the dwell and all that jargon?

Thanks