PDA

View Full Version : Brake MC question


formeRiceR
02-06-2004, 04:13 PM
What are some signs that the brake master cylinder is going???

formeRiceR
02-06-2004, 07:16 PM
question, okay if you have to pump the brake like 3 times before the brakes start clamping, and after those 3 pumps there is no movement of the pedal, that means there is air in the lines right??? and not a bad MC...

holisticbeatz
02-06-2004, 08:34 PM
Could be air in the lines. But it could also mean a bad or worn out seal inside the master cylinder. You could tell if you have a leak when you step on the brake pedal and tiny air bubbles surface to the top of the reservoir.

Try thoroughly bleeding your brakes first before you start replacing things. I hope this helps..