PDA

View Full Version : RB25 exhaust manifold wont go back on?


higgzy
03-18-2012, 12:52 AM
I'm putting my Rb25 manifold back on the enginer. There were a number of studs missing and the studs that were on it were different to the stock ones. I bought OEM studs and nuts to replace the mismatched, broken and missing ones. I can't get the stud closest to the cam gears in and so I left it with nothing in it. I went to put the manifold on to find it now doesn't fit. The studs dont align with the manifolds holes. As far as I am aware the manifold is standard. Help please! :(

Cheers

Sam

fliprayzin240sx
03-18-2012, 09:54 AM
You sure you didnt put them on cock-eyed/off centered?

KendallH
03-19-2012, 03:11 PM
Same thing happened to be. A hammer fixed it :)

Darius
04-26-2012, 08:22 AM
When the manifold heats up, it expands. Hammer method works or a little light sanding in the holes that are binding.