Springs and wheel question(Searched already)

[Touge180]

I searched but couldn't find a answer so here goes my car is lowered on stechs and i will be putting my wheels on soon 17x10 and tires are 235/40/17 my question is will i have to worry about moving my harness from the inner fender well now or when i get coilovers?

[timinthehood]

You shouldn't have to worry about anything like that

[Touge180]

Oh ok just something that was in the back of my head from reading post on the site.

[Turbo Nismo]

What car, offset, wheels? Btw the're are a couple of good threads here with lots of info, different wheels set up, with details.

http://zilvia.net/f/chat/392494-wheel-fitment-question-thread.html
http://zilvia.net/f/chat/129865-wheel-fitment-whore-thread-stretch-flush-no-specs-no-post.html

[fliprayzin240sx]

If its low enough and you drive the car hard, it could touch the harness. Relocating the harness should always be the first thing you do when you lower the car, specially if you take the plastic cover off.

[Touge180]

What car, offset, wheels? Btw the're are a couple of good threads here with lots of info, different wheels set up, with details.

http://zilvia.net/f/chat/392494-wheel-fitment-question-thread.html
http://zilvia.net/f/chat/129865-wheel-fitment-whore-thread-stretch-flush-no-specs-no-post.html

91 S13 wheels are 17x10+25......235/40/17 lowered on eibach springs not stechs.Car was lowered on springs when i bought it and the plastic fender liners are still on.And i have seen nothing in either thread that would help me with my question.