PDA

View Full Version : AN Oil Feed and Return Purchase Help


mentordrift
02-22-2012, 04:30 PM
So, I'm doing a turbo install and the turbo doesn't run a water feed/return line, but it does run oil feed and return.

I've been looking at different AN kits on Amazon, eBay, Enjuku, etc, but I have come to the realization that I have no idea what to get.

THe turbo is going on an RB25DET, the turbo itself is a T3/T4 .63 exhaust AR .50 intake AR

Can anyone suggest a reputable brand or advise on the correct flanges, etc to purchase?

ch1873857
02-22-2012, 05:29 PM
heres how i did mine. got the 2 bolt 3an fitting for the oil feed to a 90* 3an premade line to the oil feed block fitting

oil return is a generic kit off ebay. made sure it had the fittings to tailor my needs.

http://sphotos.xx.fbcdn.net/hphotos-snc7/381342_10150450175046373_631021372_8999318_1713899 085_n.jpg

waxball88
02-22-2012, 05:35 PM
I ran a 4an oil feed line to a 90* fitting and ebay restrictor.
Bought a t3/t4 10AN male oil drain fitting. Bought a 10AN straight fitting and some 10AN line.
Had a fitting welded into the pan and a 90* 10AN swivel fitting.

mentordrift
02-22-2012, 08:57 PM
heres how i did mine. got the 2 bolt 3an fitting for the oil feed to a 90* 3an premade line to the oil feed block fitting

oil return is a generic kit off ebay. made sure it had the fittings to tailor my needs.




That's pretty much what my setup looks like, too - that's weird lol. Thank you guys for the info. I'm local to summit racing, so I'll probably pick some parts up in the next few days. Thanks!