PDA

View Full Version : ka24e idles rough and wont go


srking
02-15-2012, 02:15 AM
i have sohc s13 and it starts but it idles rough and doest go unless i rev it past 3k ive put new fuel pump/filter mafs tps air charge tempurature sensor new plugs wires cap and rotor idk if this helps but it has no ac or power steering and no o2 sensor and vacuum hose delete full exhaust and cai too. please help really need this fixed

migzs14
02-15-2012, 02:18 AM
try the idle air valve if not the air regulator

srking
02-15-2012, 02:28 AM
i can clean the idle air valve right and wats the air regulator? and i was starting to think that it was off timing because the disributor looks like it was moved before i got it

migzs14
02-15-2012, 01:51 PM
It could be the timing, but did you check to see if you had any codes? The distributor most of the time should be placed in the middle of the adjustment slide. But if its not don't move it too much because it will mess your timing up.

91cupcake240
02-15-2012, 02:10 PM
im having the same problem with my duel cam :( blahh!

LOUD240
02-15-2012, 02:49 PM
put all the hoses back on it !

srking
02-15-2012, 05:02 PM
loud i cant i got it like that idk wer they go and i did move it around so i guess its timing now huh?...

srking
02-15-2012, 05:10 PM
and theres no codes ive fixed all the bad ones...

srking
02-15-2012, 05:13 PM
sorry for all these post but when i disconect the aac solenoid the idle evens out and idles ok but still doesnt go