Screamer Pipe Fitment? Users Please Chim in!

[Pinggg]

I have a tubular manifold, gt28, and a screamer pipe (pictures below) i got from a friend but his car is RHD and mines not.. So my question is will this clear my steering shaft? i search online but some say they do and some say they don't..
HELP!

http://i293.photobucket.com/albums/mm72/pingisasian/Nissan%20240sx/332834_306700996024839_100000548224954_1201058_483 972329_o.jpg
http://i293.photobucket.com/albums/mm72/pingisasian/Nissan%20240sx/333144_306748089353463_100000548224954_1201188_123 5992581_o.jpg

[harrypotter]

I don't have one, but can tell you from having a 3" up pipe that sh!t is going to hit near the first bend.

[tunermt]

What brand is it? (manufacture may be able to tell you)

worst case you will just have to modify it a bit, I would STRONGLY recommend extending it to the very bottom and back of the fire wall any way. (there is a substantial loss in power from the engine bay acting as a giant EGR system when a dump pipe/screamer pipe is not routed correctly)

Good luck and enjoy the extra sound ;)

[Pinggg]

What brand is it? (manufacture may be able to tell you)

worst case you will just have to modify it a bit, I would STRONGLY recommend extending it to the very bottom and back of the fire wall any way. (there is a substantial loss in power from the engine bay acting as a giant EGR system when a dump pipe/screamer pipe is not routed correctly)

Good luck and enjoy the extra sound ;)

i think it was a xs power but modded to have the internal WG dump instead of routing back into the exhaust.

[inopsey]

i had my screamer (38mm) off the oem manifold on that side of the down pipe and it rubbed the steering column or would hit the rail when cornering. moved it so it dumps between the tranny/engine and the downpipe.

[SHIFT_destroy]

i have one on my rb and at first that shit was all over my steering shaft ...i had to mod it a descent amount .. reroute the open dump and the exhaust pipe ....ive noticed also that the height of the motor also adds to the amount of clearance ... yours is an sr so you should have a good amount of room to figure things out

[Pinggg]

what do you guys think if i just cut it short like leave it so its like 3-4 inches long? or is that a bad idea not having the exhaust gas out of the bay?

[boost addict]

i had the isis screamer on my sr and it cleared, a little different design but i dont see why it wouldnt. if its your friends then why dont you just test fit it?

[Pinggg]

i had the isis screamer on my sr and it cleared, a little different design but i dont see why it wouldnt. if its your friends then why dont you just test fit it?

his car is RHD so theres no steering shaft to get in the way. im LHD so i do have one in the way

[Z32TT-R]

what do you guys think if i just cut it short like leave it so its like 3-4 inches long? or is that a bad idea not having the exhaust gas out of the bay?

Real bad idea, a lot easier to start a fire that way, reroute the dump pipe more toward the ground.

[twinspool]

just reroute it, it won't cost much to get the piping and cut and get welded up to where you want it so its safe distance away from the engine bay.

[Pinggg]

Yeah ill just put everything on and see what i need to do, but my head is out at the machine shop so ill have to wait till it gets back to even do anything :(

[boost addict]

his car is RHD so theres no steering shaft to get in the way. im LHD so i do have one in the way

huh? i mean test fit it on yours, unless he doesnt live near you....

edit: your op says you already have it, im confused.. try to see if it fits?

[Pinggg]

huh? i mean test fit it on yours, unless he doesnt live near you....

edit: your op says you already have it, im confused.. try to see if it fits?

i just qouted a few message up why i can't fit it yet.. my head is at the machine shop lol

[boost addict]

haha yea after i edited it i saw that but i didnt feel like editing it again

[tunermt]

Def route that thing out of the engine bay, well with the extra hassle and cost