S13 tranny in a S14

[Saviorsoul]

So I searched and have failed. I'm trying to figure out exactly how to cut a spot for the extra sensor that is on a s14 transmission. Like is there an exact spot that its suppose to be cut? What do I use to cut it? How do I know its working correctly, etc. The fear of fucking up a tranmission by cutting it has lead me to only look for s14 trannys for my swap and by god they are quite a few in between... A pictorial would be awesome if anyone has one...

[Saviorsoul]

seriously?> no one knows??? ***BUMP***

[ManoNegra]

I do, and have written about it recently.

[lflkajfj12123]

swap the bell housing

supposedly you don't need it but i swapped it anyways

[mewantkouki]

The flat spot at the top of the bell housing is where you drill the hole for the sensor. I did it a month ago on a friends car. If you search S14 Ka24de transmission on google it's pretty self explanatory once you see the picture.

[ManoNegra]

I referenced the auto bellhouse bolts and measured with a ruler
to get the approximate location for the hole
then used a series of drills for the hole

in hindsight, I should have also measured the spacing/gap to the flywheel
since I ended up bending the sensor when I fired up the engine
I've since read that you need ~1/4" washer to space up the sensor to clear the flywheel

got another sensor but been too lazy to do it
and also I've already tracked down an s14 ka transmission

http://zilvia.net/f/tech-talk/325897-s14-auto-manual-pics-rehosted-images.html#post4071505

[qwerth]

yes you could.